Singer CLASS 99 instruction manual Adjustment and Operation Binder

Page 36

Class 99 & 99K

Adjustment and Operation

of the Binder

The edge to be bound is guided into the center of the scroll. Stitching is positioned close to the edge of the binding by adjusting the scroll portion of the attachment.

●Loosen the adjusting screw and move the scroll to the right to bring the stitching closer to the binding edge. For a wider adjustment, move the scroll to the left.

Be sure that the screw is well tightened after making an adjustment.

Never pull the binding as it feeds through the scroll. Allow the attachment to do the work. Merely guide the edge to be bound well into the center of the scroll as you stitch.

Page 36

Table of Contents Previous Page Next Page

Image 36

Contents Class 99 & 99K Sewing Machines Table of Contents Instructions for Operating the Machine Sewing SuggestionsElectrical Information LightTo Remove Bulb To Insert New BulbIf the Machine is Electrically Operated If the Machine is Hand Operated To Operate the Hand MachineIf the Machine is Treadle Operated Belt ShifterProtection Against Rust Damage To Oil the Machine and Stand Class 99 & 99K Needles and Thread To Set the Needle Upper Threading To Remove the Bobbin To Wind the Bobbin Class 99 & 99K Class 99 & 99K To Replace the BobbinTo Prepare for Sewing To Start Sewing To Start SewingTo Turn a Corner BastingTo Sew Bias Seams To Remove the WorkTo Regulate Length of Stitch To Reverse the Direction of FeedTo Regulate Pressure on Presser Foot Thread TensionTo Regulate Needle Thread Tension To Regulate Needle Thread TensionBobbin Thread Tension Table of Contents Previous Page Next To Regulate Bobbin Thread TensionTo Adjust the Needle Thread Tension To Adjust the Tension on the Thread Take-up SpringTo Adjust the Bobbin Thread Tension To Clean the Stitch Forming Mechanism To Remove the Bobbin CaseRaising the Bobbin Case Latch To Replace Bobbin Case Removing the Bobbin CaseTo Replace Slide Plate Sewing SuggestionsBreaking of Needles Might be Caused by Breaking of Needle Thread Might be Caused by Breaking of Bobbin Thread Might be Caused bySkipping of Stitches Might be Caused by Class 99 & 99K Foot Hemmer ApplicationsHemming Hemmed Seams Hemming with Lace Lace Applied over HemBinder Inserting the BindingAdjustment and Operation Binder Binding Curved Edges Inside CurvesOutside Curves Gathering Foot ShirringAdjusting Points RufflerGathering Forming and Attaching a Ruffle in One Operation Pleating Group PleatingSeam Guide Zipper Foot Skirt Zipper Corded Welting Corded Seams Fashion Aids ButtonholerBlind Stitcher Bias Gauge EDGE-STITCHER Joining Lace and InsertionFrench Seams TuckingQuilter Adjustable Hemmer To make hems from 3/16 to 15/16 inch wideWide Hemming Tucker Darning or Embroidering Darning or Embroidering Needles