Singer CLASS 99 instruction manual Forming and Attaching a Ruffle in One Operation

Page 41

Class 99 & 99K

Gathering (cont')

●Set stitch length to space the fullness. A short stitch gives more fullness than a long stitch.

●Insert material to be gathered between the blue blades and through the first separator guide.

●Lower presser bar and stitch. Always test the stitch length and ruffler setting on a scrap of self fabric before proceeding with the actual work.

Forming and Attaching a Ruffle in One Operation:

●Place ruffle strip between the two blue blades and through the first separator guide.

●Place fabric to which ruffle is to be attached between the separator blade and the feed of the machine Right sides of the fabric are placed together when the seam is to ball to the side.

●Proceed as for plain gathering.

Page 41

Table of Contents Previous Page Next Page

Image 41

Contents Class 99 & 99K Sewing Machines Sewing Suggestions Table of Contents Instructions for Operating the MachineLight Electrical InformationTo Insert New Bulb To Remove BulbIf the Machine is Electrically Operated To Operate the Hand Machine If the Machine is Hand OperatedBelt Shifter If the Machine is Treadle OperatedProtection Against Rust Damage To Oil the Machine and Stand Class 99 & 99K Needles and Thread To Set the Needle Upper Threading To Remove the Bobbin To Wind the Bobbin Class 99 & 99K To Replace the Bobbin Class 99 & 99KTo Prepare for Sewing To Start Sewing To Start SewingBasting To Turn a CornerTo Sew Bias Seams To Remove the WorkTo Reverse the Direction of Feed To Regulate Length of StitchThread Tension To Regulate Pressure on Presser FootTo Regulate Needle Thread Tension To Regulate Needle Thread TensionTo Regulate Bobbin Thread Tension Bobbin Thread Tension Table of Contents Previous Page NextTo Adjust the Bobbin Thread Tension To Adjust the Needle Thread TensionTo Adjust the Tension on the Thread Take-up Spring To Remove the Bobbin Case To Clean the Stitch Forming MechanismRaising the Bobbin Case Latch Removing the Bobbin Case To Replace Bobbin CaseBreaking of Needles Might be Caused by To Replace Slide PlateSewing Suggestions Skipping of Stitches Might be Caused by Breaking of Needle Thread Might be Caused byBreaking of Bobbin Thread Might be Caused by Class 99 & 99K Hemming Foot HemmerApplications Hemmed Seams Lace Applied over Hem Hemming with LaceInserting the Binding BinderAdjustment and Operation Binder Outside Curves Binding Curved EdgesInside Curves Shirring Gathering FootRuffler Adjusting PointsGathering Forming and Attaching a Ruffle in One Operation Group Pleating PleatingSeam Guide Zipper Foot Skirt Zipper Corded Welting Corded Seams Blind Stitcher Fashion AidsButtonholer Bias Gauge Joining Lace and Insertion EDGE-STITCHERTucking French SeamsQuilter Wide Hemming Adjustable HemmerTo make hems from 3/16 to 15/16 inch wide Tucker Darning or Embroidering Needles Darning or Embroidering