| Class 99 & 99K |
Table of Contents |
|
Instructions for | Instructions for |
Operating the Machine | Using the Attachments |
Electrical Information
Remove and Replace Light Bulb Operate Electrically
Operate by Hand Treadle Operation
Protection Against Rust Damage To Oil the Machine and Stand Needle Size Chart
To Set the Needle
Upper Threading
To Remove the Bobbin To Wind the Bobbin To Replace the Bobbin To Prepare for Sewing To Start Sewing
To Turn a Corner Basting
To Sew Bias Seams
To Remove the Work
To Regulate Length of Stitch
To Reverse the Direction of Feed
To Regulate Pressure on Presser Foot Thread Tension
To Regulate Needle Thread Tension To Regulate Bobbin Thread Tension To Adjust Needle & Bobbin Tensions To Remove Bobbin Case
To Replace Bobbin Case
To Replace Slide Plate
Sewing Suggestions
The Belt
To Avoid Breaking Needles
Breaking of Needle Thread
Breaking of Bobbin Thread
Skipping of Stitches
Machine Working Heavily
The Foot Hemmer
Hemming
Hemmed Seams
Hemming with Lace
The Binder
Inserting the Binding
Adjustment & Operation of the Binder
Binding Curved Edges
The Gathering Foot
Shirring
The Ruffler
To Adjust the Ruffler
To Activate Parts of the Ruffler
Gathering
Forming & Attaching a Ruffle in One
Operation
Pleating
Group Pleating
The Seam Guide
The Zipper Foot
Preparation
Inserting a Skirt Zipper
Sewing Corded Welting
Sewing Corded Seams
Fashion Aids
The Buttonholer
The Blind Stitcher
The Bias Gauge
The
The Quilter
The Adjustable Hemmer
The Tucker
Darning or Embroidering
Singer Needles and Oil
Previous Page Next Page