Singer CLASS 99 instruction manual Darning or Embroidering

Page 55

Class 99 & 99K

DARNING OR EMBROIDERING

While darning and embroidery can be done on the machine when threaded for regular sewing, the use of feed cover plate Y, No. 32622, is recommended, as movable contact with the feed in some cases might interfere with the handling of the work.

Don not change the adjustment of the feed dog in any way, as it is essential that its position should remain as originally fixed.

When the feed cover plate Y is used, it is necessary to lead the needle thread through the eye in the thread regulator X at the left of the tension discs and not under the thread regulator. With this exception, the threading is the same as for regular sewing (see Fig. 14, page 13).

Remove the presser foot and let down the presser bar lifter to restore the tension on the needle thread, which is released and inoperative when the lifter is raised.

Machine Threaded for Darning and

Embroidery

Page 55

Table of Contents Previous Page Next Page

Image 55
Contents Class 99 & 99K Sewing Machines Sewing Suggestions Table of Contents Instructions for Operating the MachineLight Electrical InformationTo Insert New Bulb To Remove BulbIf the Machine is Electrically Operated To Operate the Hand Machine If the Machine is Hand OperatedBelt Shifter If the Machine is Treadle OperatedProtection Against Rust Damage To Oil the Machine and Stand Class 99 & 99K Needles and Thread To Set the Needle Upper Threading To Remove the Bobbin To Wind the Bobbin Class 99 & 99K To Replace the Bobbin Class 99 & 99KTo Prepare for Sewing To Start Sewing To Start SewingTo Remove the Work To Turn a CornerBasting To Sew Bias SeamsTo Reverse the Direction of Feed To Regulate Length of StitchThread Tension To Regulate Pressure on Presser FootTo Regulate Needle Thread Tension To Regulate Needle Thread TensionTo Regulate Bobbin Thread Tension Bobbin Thread Tension Table of Contents Previous Page NextTo Adjust the Tension on the Thread Take-up Spring To Adjust the Needle Thread TensionTo Adjust the Bobbin Thread Tension To Remove the Bobbin Case To Clean the Stitch Forming MechanismRaising the Bobbin Case Latch Removing the Bobbin Case To Replace Bobbin CaseSewing Suggestions To Replace Slide PlateBreaking of Needles Might be Caused by Breaking of Bobbin Thread Might be Caused by Breaking of Needle Thread Might be Caused bySkipping of Stitches Might be Caused by Class 99 & 99K Applications Foot HemmerHemming Hemmed Seams Lace Applied over Hem Hemming with LaceInserting the Binding BinderAdjustment and Operation Binder Inside Curves Binding Curved EdgesOutside Curves Shirring Gathering FootRuffler Adjusting PointsGathering Forming and Attaching a Ruffle in One Operation Group Pleating PleatingSeam Guide Zipper Foot Skirt Zipper Corded Welting Corded Seams Buttonholer Fashion AidsBlind Stitcher Bias Gauge Joining Lace and Insertion EDGE-STITCHERTucking French SeamsQuilter To make hems from 3/16 to 15/16 inch wide Adjustable HemmerWide Hemming Tucker Darning or Embroidering Needles Darning or Embroidering