AT&T TL7600 user manual Behind-the-neckband

Getting started

Headset attachments

Behind-the-neckband

The neckband ring is positioned for right-ear wearing when first purchased.

To wear the headset on your left ear:

1.Remove the ring from the neckband. Note the small opening in the plastic at the place where the ring meets the neckband. Then rotate the ring post up and through that small opening, as shown in Figure 1.

Ring

Figure 1

2.Snap the ring into the small socket at the end of the left arm of the neckband

To attach the headset to the neckband for wearing on the left or right ear:

1.Remove any headset attachment currently connected to the headset.

2.Insert the earpiece into the neckband ring as shown in Figure 2.

Figure 2

14