Getting started
Charger installation
1.Plug the small end of the charger power adapter into the jack on the underside of the charger, then route the cord through the slot as shown.
2.Plug the large end of the charger power adapter into a power outlet not controlled by a wall switch.
IMPORTANT INFORMATION
1.Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at
www.telephones.att.com, or call 1 (800)
In Canada, dial 1 (866)
2.The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,