Getting started
Battery installation
Install the battery as shown below. For optimal performance, charge the headset battery for at least six hours before use. When not in use, recharge the headset by returning it to the headset charger.
1
2
3
4
1.If the battery door is attached, press on both sided of the battery compartment cover and lift the cover up and off.
2.Insert the battery into the battery compartment with the label THIS SIDE UP facing up.
3.Push the battery plug into the connector inside the compartment according to the
4.Insert the tab on the bottom of the battery cover into the battery compartment. Press down gently on the battery cover until it snaps into place.
NOTE: Remove the ear hook from the headset (see page 11) before battery replacement.