Operation
Headset operation
Temporary ring tone silencing
Press MUTE/FLASH to temporarily silence the ring tone in the headset earpiece. This silences the ring tone without disconnecting the call. The next incoming call rings normally at the preset volume.
NOTE: If you have more than one headset registered to the headset base, both headsets receive the ring tone when there is an incoming call. Pressing MUTE/FLASH on one headset will only silence the ring tone of that particular headset.
Intercom and intercom call transfer
If you have registered your headset to an AT&T DECT cordless telephone, follow the instructions in your telephone user’s manual for intercom and intercom call transfer.
When the cordless handset prompts you to enter a handset number:
•If you have one registered handset, press # on the cordless handset.
•If you have two registered handsets, press #1 for headset 1 and #2 for headset 2.
NOTE: You can only intercom or intercom call transfer from an AT&T DECT cordless handset to the DECT cordless headset.
19