Eureka AS3100 How to clear a blockage, Make sure vacuum is turned off and power cord is unplugged

Page 10

How to clear a blockage

C A U T I O N

Make sure vacuum is turned off and power cord is unplugged.

If vacuum is not cleaning carpet, air path on vacuum back may be blocked.

• Lift latch and pull out dust cup (Fig. 1).

• To empty debris, press lever to release bottom lid (Fig. 2).

If no suction at end of hose, hose may be blocked.

• Remove dust cup.

• Turn air path knob to ‘TOOLS.’

•Use finger to check for debris in air path (Fig. 3).

•If still clogged, twist hose counter- clockwise to remove hose from vacuum body (Fig. 4). Flex hose to loosen debris.

1

3

2

4

10Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com

Image 10

Contents Thank you for purchasing your new Eureka vacuum Where to find important vacuum information ContentsImportant Safeguards What comes in the carton OW EHow to assemble your vacuum cleaner Front View BackHow to identify parts of your vacuum cleaner Some modelsFilter maintenance instructions Dust cup Empty after each useHow to use your vacuum cleaner Empty dust cup after every useCr vice tool How to use accessoriesDusting brush Turbo nozzleHow to clear a blockage Make sure vacuum is turned off and power cord is unpluggedHow to maintain brush roll How to maintain turbo nozzleHow to clean brush roll How to replace brush roll or belt Carpet or bare floor Problem Solution Motor will not startVacuum does not clean No suction atEureka limited warranty USA Mexico 55 CanadaEureka Customer Service Helpline