How to use your vacuum cleaner

• Pull out cord to desired length	1
(Fig. 1). Do not pull past red line.
Press button to rewind cord.
• Plug power cord into outlet.
• To vacuum floors, turn air path knob
to ‘FLOORS’ (Fig. 2).
• Turn knob to adjust height for bare	3
	3
floor and Low to High pile carpet
(Fig. 3).
• Adjust brush roll on/off pedal. Step on
pedal to turn brush roll on for carpet
or off for bare floors (Fig. 4).
• Step on power switch to turn on.	5
Step on again to turn off (Fig. 5).
• Step on handle release to lower
handle into position (Fig. 6).
Empty dust cup after every use	7
• Lift latch and pull out dust cup
(Fig. 7).
• To empty debris, press lever to
release bottom lid (Fig. 8).

8Eureka Customer Service HELPLINE 1-800-282-2886

(Fig. 1). Do not pull past red line.