Eureka AS3100 manual Filter maintenance instructions, Dust cup Empty after each use

Page 7

Filter maintenance instructions

Dust cup – Empty after each use

Belt – Check regularly

Press lever to release bottom lid. Debris

For belt change instructions,

will empty. Close lid until it clicks.

go to page 12.

Pull latch to lift up cover. Lift out foam filter and filter screen; shake off dust.

Rinse foam filter, screen and dust cup. Dry all thoroughly.

Align tabs on filter screen with slots on back of cup. Drop into position. Reinstall foam filter and close cover. Warning: Filters and screen must be positioned properly for cover to lock.

Remove dust cup. Twist filter cover counter-clockwise and lift off. Replace

 

exhaust filter and cover. Turn to lock and snap dust cup back into place.

 

Exhaust filter cover must be in place at all times.

 

 

Brush roll – Clean monthly

 

7

Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Thank you for purchasing your new Eureka vacuum Contents Where to find important vacuum informationImportant Safeguards OW E What comes in the cartonFront View Back How to assemble your vacuum cleanerSome models How to identify parts of your vacuum cleanerDust cup Empty after each use Filter maintenance instructionsEmpty dust cup after every use How to use your vacuum cleanerTurbo nozzle How to use accessoriesDusting brush Cr vice toolMake sure vacuum is turned off and power cord is unplugged How to clear a blockageHow to maintain brush roll How to maintain turbo nozzleHow to clean brush roll How to replace brush roll or belt No suction at Problem Solution Motor will not startVacuum does not clean Carpet or bare floorUSA Mexico 55 Canada Eureka limited warrantyEureka Customer Service Helpline
Top Page Image Contents