Eureka AS3100 How to maintain turbo nozzle, How to maintain brush roll, How to clean brush roll

Page 11

How to maintain turbo nozzle

1	Turn nozzle onto
	back side. Remove
	1 screw.

Rotate lower part of

2 cover down over brush and lift off cover.

Clear blockage from

3 brush roll area. Use scissors to clip threads or hair.

4	Place cover back
	into position.
	Tighten screw.

How to maintain brush roll

C A U T I O N

Make sure vacuum is turned off and power cord is unplugged.

How to clean brush roll

• Check brush roll periodically and remove debris.

• Step on handle release to lower handle (Fig. 1).

• Turn vacuum face down on floor.

• Use scissors to clip threads or hair (Fig. 2).

1

2

Eureka Customer Service HELPLINE 1-800-282-2886	www.eureka.com	11

Image 11

Contents Thank you for purchasing your new Eureka vacuum Contents Where to find important vacuum informationImportant Safeguards OW E What comes in the cartonFront View Back How to assemble your vacuum cleanerSome models How to identify parts of your vacuum cleanerDust cup Empty after each use Filter maintenance instructionsEmpty dust cup after every use How to use your vacuum cleanerTurbo nozzle How to use accessoriesDusting brush Cr vice toolMake sure vacuum is turned off and power cord is unplugged How to clear a blockageHow to clean brush roll How to maintain turbo nozzleHow to maintain brush roll How to replace brush roll or belt No suction at Problem Solution Motor will not startVacuum does not clean Carpet or bare floorUSA Mexico 55 Canada Eureka limited warrantyEureka Customer Service Helpline