FOR HARD SURFACE
FLOOR CLEANING
The power nozzle can be used for cleaning hard sur- face floors such as wood, linoleum, vinyl, asphalt and rubber tile, sealed cork, concrete and terrazzo as well as carpet. You will find it particularly con- venient when cleaning rugs to adjust the power noz- zle to “Bare Floor” and continue cleaning the sur- rounding floor surfaces. The small front wheels on the bottom of the power nozzle provide the proper nozzle height for hard surface floors. The brush located directly behind the nozzle opening helps to provide effective cleaning of hard surface floors.
Adjust the Surface Selector with your toe to the “Bare Floor” setting. The Selector Indicator should show the lever on the “Bare Floor” position. As you move from the rug surface and begin to clean the floor, you will hear an increase in sound as the agitator brushes power sweep the floor. If you pre- fer you may use the Wall/Floor Brush to clean hard surface floors. The power nozzle is not recom-
mended for very irregular floor surfaces such as brick, slate and certain parquet floors. To clean
these floors use the Wall/Floor Brush.