Hoover UH70200 Vacuum Assembly, Carton contents, Attach handle, Attach dirt cup, Position Tools

1. Vacuum ASSEMBLY

Carton contents

A.Handle

B.Vacuum Base

C.Powered Hand Tool*

D.Powered Hand Tool Clip

E.Crevice Tool

F.Dusting/Upholstery Tool*

G.Wand

H.Screw (for assembly)

I.Dirt Cup

*Tool varies per model.

Remove all parts from carton and identify each item shown.

Make sure all parts are located before disposing of packing materials.

1.1	B	C	E	G	H
A			D		I
			F

Attach handle

Note: Remove the screw located in the vacuum base and set aside until instruction 1.3

1.2Insert handle section into vacuum base. Push down firmly.

1.3Using a Phillips screwdriver, fasten (1) screw behind handle into vacuum base.

1.2

1.3

Attach dirt cup

1.4Place bottom of dirt cup into vacuum body first. Pivot cup into vacuum. Dirt cup is secure when you hear a click.

1.4

Position Tools

1.5Secure Powered Hand Tool Clip (A) over ridges on side of handle. Attach bottom of Powered Hand Tool and pivot into clip until secure.

1.6Place Crevice Tool into Wand and slide into tool storage area on left back side (B) of vacuum and place Upholstery Tool on right back side (C) of vacuum as shown.

1.5

A

1.6

B C

5