Bissell 50C9 Changing the light bulb, TurboBrush maintenance, Ends into slots on sides as shown

Page 15

Maintenance and care

Changing the light bulb

2

1.Unplug cleaner from electrical outlet.

2.Recline handle for easier access to light bulb and remove screw to lift off lens.

3.Remove the bulb by grasping bulb and pull-

ing straight out of the socket. Install the new

3

bulb by pushing gently into the socket until the bulb snaps into place.

TurboBrush maintenance

The TurboBrush should be checked regularly for clogs or debris wrapping around the brush.

1.Remove tool from hose or front of vacuum.

2.	Twist collar so opening is at the top and lift	2

top cover to remove.

3.Remove the brush from the belt and clean debris.

4.Replace the brush inside the belt and place

ends into slots on sides as shown.

4

5.Reposition top cover making sure to line up inside tab at the front with the opening on the cover. Twist collar until opening is at the bottom to lock into place.

5

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

15

Image 15

Contents E R ’ S G U I D E C U U MThank you for buying a Bissell Heavy Duty Vacuum Important Safety Instructions Hose Collar Brush Window Attach hose by lining up the tabs on Tool required Phillips screwdriverPower button is located at the top of the vacuum handle Transporting your cleanerReleasing the power cord Fingertip power switchHeight adjustment Fingertip brush switchBrush auto shut-off feature Crevice tool Using the toolsTurboBrush Upholstery toolChoose an emptying method Emptying the dirt containerCleaning the foam filter Cleaning the dirt containerMaintenance and care Check to see if dirt container is full. Empty if needed Clearing clogsThermal motor protection Brush reset Brush maintenanceBelt maintenance Ends into slots on sides as shown TurboBrush maintenanceIng straight out of the socket. Install the new Changing the light bulbVacuum cleaner won’t turn on Vacuum cleaner won’t pick up or low suctionBrush not rotating Vacuum cleaner is difficult to push Visible dust escaping from cleanerAuthorized service representative Bissell Consumer Services 131415 Part NameOr Call Limited Five Year WarrantyIf your Bissell product should require service Website or E-mail