Operation
Using the tools
1Make sure the cleaner is in the upright position.
2.Remove the hose wand from the wand base. This automatically diverts the suction to the hose. Unwind the hose from the cleaner.
Note: To help prevent the machine from tipping, the hose should remain in the bottom hose clip.
3.Use the hose and wand alone or attach any of the tools to the end of the hose wand.
TurboBrush
Use rotating brush action for small areas such as stairs and upholstery.
Note: Press gently when using the TurboBrush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating.
Upholstery tool
Use shorter stiff bristles when agitation is needed to remove debris.
Crevice tool
Use in tight narrow spaces
Telescoping extension wand
Use with desired attachment for a longer reach. To extend the wand, twist the collar to “Unlock” and push away from you. Twist the collar to “Lock” to lock into place. To retract, twist to unlock, pull toward you and twist to relock.
All items may not be included with your model. Other tools are available; to order, please refer to page
ATTENTION:
Always place the vacuum cleaner on the floor in its fully upright position when using tools. Placing the vacuum in this position automatically stops the rotating brush.
2
CAUTION:
To avoid personal injury and to prevent the cleaner from falling when cleaning stairs, always place it at the bottom of the stairs.
8 w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1