Bissell 50C9 warranty Vacuum cleaner is difficult to push, Visible dust escaping from cleaner

Page 17

Troubleshooting

Vacuum cleaner is difficult to push

Possible causes

1. Incorrect height setting

Visible dust escaping from cleaner

Possible causes

1.Filter tray missing or not installed properly

2.Foam filter missing or not installed properly

3.HEPA media filter cartridge missing or not installed properly

4.Dirt container not installed properly

5.Dirt container not assembled properly

6.Hose not installed properly

7.Hole or crack in hose

Remedies

1.Turn dial to higher setting

Remedies

1.Check filter tray to make sure it is fully inserted

2.Check foam filter for correct installation

3.Check HEPA media filter cartridge for correct installation

4.Make sure dirt container is correctly positioned and snapped into place

5.Check screen, upper and lower portions of the dirt container for proper assembly

6.Make sure hose wand is fully seated in base, make sure foot hose is properly attached to diverter area

7.Check hose for holes or cracks and replace if needed

Other maintenance or service not included in the manual should be performed by an

authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of service.

Contact us directly at 1-800-237-7691.

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

17

Image 17

Contents E R ’ S G U I D E C U U MThank you for buying a Bissell Heavy Duty Vacuum Important Safety Instructions Hose Collar Brush Window Attach hose by lining up the tabs on Tool required Phillips screwdriverReleasing the power cord Transporting your cleanerFingertip power switch Power button is located at the top of the vacuum handleBrush auto shut-off feature Height adjustmentFingertip brush switch TurboBrush Using the toolsUpholstery tool Crevice toolChoose an emptying method Emptying the dirt containerCleaning the foam filter Cleaning the dirt containerMaintenance and care Check to see if dirt container is full. Empty if needed Clearing clogsThermal motor protection Belt maintenance Brush resetBrush maintenance Ing straight out of the socket. Install the new TurboBrush maintenanceChanging the light bulb Ends into slots on sides as shownBrush not rotating Vacuum cleaner won’t turn onVacuum cleaner won’t pick up or low suction Authorized service representative Vacuum cleaner is difficult to pushVisible dust escaping from cleaner Bissell Consumer Services 131415 Part NameIf your Bissell product should require service Limited Five Year WarrantyWebsite or E-mail Or Call