Bissell 7950 warranty Maintenance/Storage, Trigger. Caution Do not over wet

Page 17
When carpet is dry, vacuum again to remove hair and fuzz that the ProHeat may have loosened.
11.
Bare Floor Cleaning Technique

 

Slowly move the machine nozzle with Bare Floor Tool forward

 

 

 

1.

 

 

 

and back over soiled surface one time while pressing the

 

WARNING:

 

 

Trigger. Caution: Do not over wet.

 

 

 

Repeat the motion without pressing the Trigger using the Bare

 

To reduce the risk of fire,

 

 

 

electric shock or injury

 

2.

 

 

Floor Tool to squeegee and suction up the dirty water.

 

 

 

unplug from outlet before

 

 

Repeat steps 1 and 2 backing along the exit path.

 

servicing.

 

3.

 

 

 

 

 

 

 

 

 

 

 

4.

Allow about 30 minutes for the floor to dry completely.

Tip:

 

 

SmartMix Tank

 

When the cleaning job is complete, refer to the Maintenance/

5.

may be stored

Storage section below.

with concentrate

 

 

ready for your

6.

To remove Bare Floor Tool gently bend long tab (right side)

next cleaning job.

outward and pull tool down away from nozzle. Rinse

Make sure dial

 

thoroughly, dry and store

is turned to the

 

 

Water Rinse/

Maintenance/Storage

Carpet Protector

Setting when

 

 

storing.

1.

Turn Power and SmartTemp switches OFF ( O ).

 

 

 

2.

Unplug power cord from the outlet .

 

 

 

3.

Coil Flex Hose around storage brackets on the Tool Caddy.

D

 

 

4.

Coil Power Cord around Power Cord Quick Release.

 

 

 

5.

Remove and rinse tools in clean, running water. Dry and

 

replace on tool caddy.

 

6.

Remove Tank-In-Tank, dispose of dirty water. See Features

 

section, pages 7-9.

 

7.

Rinse out Tank-In-Tank and replace on the machine; Clean out

 

lint trap.

 

8.

Clean out the Flow Indicator Filter each time it is used to ensure

 

best cleaning performance. Unscrew the Flow Indicator Cap, lift out

 

 

the red rotor and white filter. Rinse all 3 parts in tap water. Replace

 

 

the filter with the post facing upward. Replace the rotor. Replace the

 

 

Flow Indicator Cap; turn until snug, do not over-tighten.

 

 

Note: SmartMix Tank may be stored with concentrate

 

 

ready for your next cleaning job. Make sure dial is turned

 

 

to the Water Rinse/Carpet Protector Setting when storing.

 

 

Wipe all exterior surface with a soft cloth.

Cap

9.

 

 

Rotor

 

Store cleaner upright in a protected, dry area.

10.

 

Note: ProHeat uses water and must not be stored where

Filter

there is a danger of freezing. Freezing will

damage internal components and void the warranty.

17

ug310-5861_7950_205.indd 17

3/11/05 8:31:25 AM

Image 17
Contents E R ’ S G U I D E ProHeatThanks for buying a Bissell ProHeat Self Propelled Important Safety Instructions Power Cord Powerdrive Knob Will not allow it to exceed Special Features of your Bissell ProHeat Self PropelledSmartMix Tank Dial DirtLifter PowerBrushSmartMix Uses to keep the Belts running free When It’s Time to Empty Tank-in-TankTank-in-Tank ReadyTools Dial Flow IndicatorFloor Cleaning Before You Clean CarpetsOperation Machine PreparationCleaning Fluid Section Use one of the following methods to Preclean the stain Be sure to pre-test any spot removal solutions or chemicalsArea with a clean, damp, color safe cloth Stain RemovalWhen You’re Done AssemblyTurboBrush UseScotchgard protector Applicator Optional Important Check Upholstery Tags How to Clean Upholstery and Small AreasCleaning Technique Cleaning Tool Trigger. Caution Do not over wet Maintenance/StorageLocate and remove broken pump belt Pump Belt and Brush Belt ReplacementSmartMix Tank and belt access door To Install the Replacement Pump BeltAssembly is now complete Services atPowerdrive is in the OFF position TroubleshootingTurn on the SmartTemp Switch Clean out Flow Indicator Filter,Re-install lid refer to Set to proper setting Set to tool settingBrush Belt or Pump Belt is off or broken Turn the machine OFF and unplug fromAm 10 pm ET Bissell Consumer Services0730 Replacement Parts Bissell ProHeat015-0621 Limited Two Year Warranty About Your Warranty
Related manuals
Manual 24 pages 10.43 Kb

7950 specifications

The Bissell 7950, also known as the Bissell PowerForce Helix, is designed to provide a powerful cleaning experience for those looking to keep their home spotless. This vacuum cleaner combines efficiency with innovative technologies, making it an excellent choice for tackling everyday dirt and debris.

One of the standout features of the Bissell 7950 is its Helix Cleaning System, which utilizes a unique dual-cyclonic dirt separation technology. This system ensures that dirt and dust are separated effectively, providing consistent suction power throughout your cleaning tasks. The Helix design helps to maintain performance, even as the dirt bin fills, ensuring that users do not need to worry about performance decline, a commonplace issue with many vacuum models.

The Bissell 7950 comes equipped with a lightweight frame, making it easy to maneuver around your home, whether you're navigating through rooms or carrying it up stairs. Its compact design does not compromise the power, offering a robust motor capable of handling various surfaces, including carpets, upholstery, and hard floors. Users will appreciate the adjustable height settings that allow for tailored cleaning on different surface types, ensuring that each area receives the cleaning it requires.

Moreover, the vacuum features a large, easy-to-empty dirt cup, minimizing mess during disposal. This feature is complemented by a washable filter, promoting sustainability and reducing the need for frequent replacements. This not only helps in maintaining suction power but also cuts down on maintenance costs.

Another significant characteristic of the Bissell 7950 is its set of specialized attachments. The vacuum includes a crevice tool, dusting brush, and upholstery tool, making it versatile for various cleaning tasks around the house. These tools allow users to reach into tight spaces, dust delicate surfaces, and clean furniture with ease.

In terms of design, the Bissell 7950 sports a modern aesthetic with intuitive controls that simplify the user experience. The power cord is sufficiently long, providing users ample reach without constantly needing to switch outlets. Additionally, the vacuum's cord rewind feature adds convenience, allowing for quick storage.

In summary, the Bissell 7950 PowerForce Helix is a dynamic and versatile vacuum cleaner that adeptly combines advanced cleaning technologies with user-friendly features. Its efficient Helix Cleaning System, lightweight design, specialized attachments, and easy maintenance make it a formidable opponent against dirt, dust, and allergens in any household. This model is an excellent investment for those seeking both power and versatility in their cleaning equipment.