Bissell 7950 To Install the Replacement Pump Belt, Turned, SmartMix Tank and belt access door

To Install the Replacement Pump Belt

1

With the unit still on its side, loop one end of the replacement

1. pump belt around the red pump pulley and then the other end around the silver motor shaft. Do not twist the replacement pump belt.

2.

3.

Re-install the toothed brush belt first onto the red pump pulley and then onto the toothed end of the brush.

Re-Install the brush into the base of unit.

24

Place the black brush arm onto the brush and slide black

4. brush arm into base of unit. The black brush arm and brush should slide easily into original position.

5.	Re-install the red retainer plate and Phillips head screw.
	Using your finger, gently spin the replacement pump belt
6.	on the silver motor shaft. If assembled correctly, the
	replacement pump belt should rotate freely around the
	silver motor shaft and drive pulley without obstruction. The
	brush should also rotate freely when the silver motor shaft is
	turned.
7.	Turn the machine right side up and replace the Tank-In-Tank,
	SmartMix Tank and belt access door.
8.	Assembly is now complete.
	If you have any questions, or are having trouble installing
	your replacement pump belt, please call BISSELL Consumer

Services at 1-800-237-7691.

56

7a 7b

19

ug310-5861_7950_205.indd 19 3/11/05 8:31:27 AM