SmartMix®
Provides custom solution control for each cleaning job.
Lift the SmartMix concentrate tank up and out of the
1. machine base.
Turn the tank over so that the valve cap is in an upward
2. position. Unscrew the valve cap and fill the tank to the fill line with BISSELL Fiber Cleansing Formula.
3. Replace the valve cap turning until snug.
Replace SmartMix concentrate Tank.
4.
Choose the SmartMix setting that fits the cleaning job.
5.
Water Rinse / Carpet Protector
Normal- automatically provides the best mix of water and concentrate for most cleaning jobs.
High Traffic- automatically mixes the right amount of water and concentrate to dissolve tough grime and heavy soil. Note: Residual cleaning materials left in carpet from other products may cause excessive foaming when picked up. If foam is overflowing tank, move SmartMix Dial to “Water Only” position until the condition stops.
Note: Both the SmartMix Tank and the clean water tank must have liquid in them for the machine to spray. If one tank is empty, the machine will temporarily lose its prime and not apply either cleaning solution or water only.
DirtLifter® PowerBrush
The powered brush roll at the floor nozzle is designed to enhance cleaning performance. The bristle pattern lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension
SmartMix
Tank
1.
2.
D
5.
SmartMix
Dial
HIGHTRAFFIC | RINSE/ |
NORMAL | |
| PROTECTOR |
WATER | |
CARPET | |
Tip:
Deep Cleaning stairs and high traffic areas on a regular basis and using the Scotchgard protector can prolong carpet life.
WARNING:
To reduce the risk of fire, use only BISSELL Deep Cleaning Formula for full size machines in your ProHeat. Use of cleaning formulas which contain lemon or pine oil may damage this appliance and void warranty. Chemical spot cleaners or solvent based soil removers should not be used. These products may react with the plastic materials used in your ProHeat, causing cracking or pitting.
7
3/11/05 8:31:16 AM |