ProHeat assembly is now complete.
How to Use This Guide
This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat Self Propelled deep cleaner. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your deep cleaner.
Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat Self Propelled for many years.
Your ProHeat comes in 3, easy to assemble components plus accessories.
Upper Handle
Lower Handle Tool Caddy
The only tool you will need to assemble your cleaner is a Phillips
head screwdriver.
How to Put It Together
Refer to Assembly Diagram on page 4
Make sure the Powerdrive Knob is in the “ON” position.
1.
Slide Upper Handle onto Lower Handle.
2.
Insert 2 screws into lower holes while gently pushing
3. down on Upper Handle. See drawing for exact location. Tighten screws completely.
Position Tool Caddy on back of unit. Insert 4 screws until snug.
WARNING:
Do Not plug in your cleaner until you have completely assembled it per the following instructions and are famil- iar with all instructions and operating procedures.
1.
Powerdrive Knob
2.
3. Tighten
Completely
4.
Snap tools into storage on the Tool Caddy as shown in4.
5. figure 4.
5.
5
3/11/05 8:31:15 AM |