Special Features of your BISSELL ProHeat Self Propelled
Self Propelled Powerdrive
The ProHeat Self Propelled home cleaning system is the first and only deep cleaner with a powerdrive. The Self Propelled feature allows you to clean forward and backward using a minimum amount of effort while maximizing cleaning.
1.
Simply turn the Powerdrive Knob to the “ON” position.
Push the handle slightly forward to engage the
2. powerdrive in the forward motion and pull slightly back for ease of motion on the backward pass.
The Powerdrive Knob may be turned to the “OFF” position
3. for transporting the machine, or for maneuvering around delicate furniture.
The BISSELL SmartClean® System
The ProHeat is a home cleaning system that heats hot tap water and automatically mixes it with Fiber Cleansing Formula. The solution is heated as it is applied to the carpet with Fiber Cleansing Formula. The combination of heated cleaning solution, powered brushes and suction provide a safe and thorough method of cleaning.
SmartTemp®
Temperature control automatically heats the cleaning solution as it is being applied to the carpet * to safely optimize cleaning effectiveness.
The Power Switch on the handle controls power to the
1. machine; both switches must be ON ( I ) for SmartTempSmartTemp Ready Light to work.
The SmartTemp Switch is found on the handle, near the
2. Power Switch. You may choose not to use the SmartTemp feature if you are cleaning delicate wool or oriental rugs.
*SmartTemp heats the cleaning solution for carpet and bare floor application only. It does not heat solution sprayed through the accessory tools.
The SmartTemp Ready Light indicates when the heater is
3. ON ( I ). It is found on the front of the handle where it is easy to see while you clean.
Note: Allow 1 minute for the
4. | SmartTemp increases the water temperature approximately |
25° and will not allow it to exceed 180.° |
16
3/11/05 8:31:15 AM |