Troubleshooting

ENGLISH

20. Fuse holder

If the fuse has blown, it is possible that a serious problem has occurred internally, so please contact your dealer before replacing the fuse.

21. AC inlet

Connect the included AC power cable to this connector. Use this amp only with the input voltage indicated on the panel.

22. SPEAKER OUTPUT jack

This is a speaker output jack connected to internal speaker system.

In addition to the SW100’s internal speaker, you can connect an extension speaker that has an impedance of 8 ohms and power-handling input capacity of 100W or greater.

23. EFFECTS LOOP SEND jack

This is an output jack for an effects device. Connect it to the input of your effects device. Although the input and output of this effect loop are suitable for compact effects, they can also be used with rack-mount type effect processors.

24. EFFECTS LOOP RETURN jack

This is an input jack for an effects device. Connect the output of your effects device to this input.

25. TUNER OUT jack

This is an output for connecting your tuner. You may connect a compact tuner or a rack-mounted tuner to this jack.

1.The power supply cannot be switched on.

•Check that the power cable has been connected correctly.

•Try plugging it into a different socket and see if the same problem occurs.

2.The power supply can be switched on, but no sound is heard.

•Is your bass connected correctly?

•Do you still hear no sound after removing all external devices such as effect units connected between your bass and the amp, or devices connected in the effect loop?

•Use a different shielded cable and check to see if any sound is heard.

•Is the volume of your bass turned to 0?

•If your bass has active circuitry, has the battery run down?

•Is sound produced when you use another bass?

•Check to see if the volume on the amplifier is set to ì0î.

•Check to see if the headphones are connected.

3.Noise is heard.

•Check to see if anything in the immediate vicinity is resonating or banging against the amplifier to produce the noise.

•If your bass has active circuitry, has the battery run down?

•Is there still noise if you use a different bass or other external devices (e.g., effects) and cable?

4.No sound is produced in the headphones

•Check that the headphones are connected correctly.

•Connect another set of headphones and see if sound is produced.

In case of defects

This product has passed exhaustive inspections before being shipped from the factory. Ensure that the above procedures are carried out when a problem is thought to exist. Contact your dealer in the unlikely event that an abnormality occurs during use. Also, ensure that the symptoms of the problem are explained in detail when requesting repair in order to facilitate swift handling.

Because of improvements to this product, the specifications may change without notice.

100 specifications

The Furuno 100 is a state-of-the-art marine equipment designed to enhance navigation, safety, and communication for both commercial and recreational vessels. As one of the leading products from Furuno, a renowned name in marine electronics, the Furuno 100 boasts impressive features tailored to meet the demands of modern maritime operations.

One of the main features of the Furuno 100 is its advanced radar technology. The radar system is equipped with high-resolution imaging, allowing operators to distinguish between various objects in the water, such as boats, land, and navigational buoys. The radar's target tracking capability enables users to monitor moving vessels, providing critical information that aids in collision avoidance and safe navigation.

In addition to radar, the Furuno 100 includes GPS functionality, offering precise positioning and navigation support. This feature is essential for maritime activities, ensuring that users can accurately determine their location and navigate to their desired destinations with confidence. The built-in chart plotter further enhances this functionality, allowing users to access electronic charts and visualize their route on a digital map.

Another key feature of the Furuno 100 is its integration with various communication technologies. The device supports both AIS (Automatic Identification System) and VHF radio communication, facilitating real-time vessel tracking and communication with other ships and coastal stations. This level of connectivity is vital for maintaining situational awareness and improving safety on the water.

The Furuno 100 is also designed with user-friendly interfaces and controls, ensuring that operators can easily navigate the system's features. The display offers clear graphics and a responsive touchscreen, making it simple to manage settings, monitor radar, and access navigation tools.

In terms of durability and reliability, the Furuno 100 is built to withstand harsh marine environments. Its robust construction ensures that it can endure exposure to saltwater, moisture, and extreme temperatures. This resilience is vital for ensuring consistent performance in varying maritime conditions.

With its cutting-edge technology, advanced features, and user-centric design, the Furuno 100 stands out as an essential tool for today's mariners. Whether for commercial shipping or recreational boating, this innovative device enhances navigation safety and operational efficiency, making it a valuable addition to any vessel.