2. Operating States
In the main desktop screen, there are some specific Operating States that are indicated on the status line. These are summarized below:
3. Adjusting the Operating Set Point
The Operating Set Point of this water heater determines the regulated temperature for the water in the tank. This parameter is adjusted in the Temperature menu. Items in this menu allow you to monitor different tem- perature readings in the tank along with adjusting the Operating Set Point and Differential.
ACTION:
From the desktop screen, press Menu.
DISPLAY:
ACTION:
Press Change then use the UP and DOWN buttons to change the Set Point.
Note: This procedure can also be used to change the Differential. The Tank, Upper and Lower Temperatures are not user changeable. They are determined by the temperature probes on the heater.
DISPLAY:
ACTION:
From the Main Menu, press Select to enter the "Temperatures" screen.
DISPLAY:
ACTION:
Press Update to accept the change or Cancel to reset it.
DISPLAY:
16