Rheem RMTG2-42(PVN)(PVP), PTG2-42(PVN)(PVP) warranty Indoor Water Heater, Additional Considerations

Page 13

Installing the water heater:

Outdoor Water Heater

 

Caulk

 

 

 

Rising moisture will collect under eaves

 

 

(1.8 m)

 

If soffit vent is too close,

6'

 

6' (1.8 m)

 

block off and install new

 

caulk zone or

 

vent at another location

Inside

to edge of

corner

6' (1.8 m) caulk

window etc., starting

 

within 6' (1.8 m)

 

zone

 

 

Caulk

Caulk

 

 

 

4'

 

 

(1.2 m) 12” (30 cm)

Indoor Water Heater

Caulk

 

 

Rising moisture will

 

 

 

collect under eaves.

 

 

If soffit vent is too close,

 

 

 

block off and install new

6’

 

 

vent at another location.

 

 

(1.8 m)

 

Inside

 

 

Caulk

6’ (1.8 m)

 

Corner

 

 

6’ (1.8 m)

Caulk

 

 

Caulk Zone

zone or to edge of window

 

 

 

etc.,starting within 6’ (1.8 m).

Caulk

 

 

RTV silicone caulk

 

4’

Wall thimble face plate

 

 

(1.2 m)

12”(30 cm)

 

 

 

 

WARNING: Moisture in the flue gas will condense as it leaves the vent terminal. In cold weather this condensate can freeze on the exterior wall, under the eaves and on surrounding objects. Some discoloration on the exterior of the building is to be expected. However, improper location or installation can result in severe damage to the structure or exterior finish of the building.

Additional Considerations

Do NOT install vent terminal under any patio or deck.

To help prevent moisture from freezing on walls and under eaves, do not locate vent terminal on the side of a building with prevailing winter winds.

To help prevent water lines from freezing, do not locate vent terminal on the side of a building with prevailing winter winds.

Do NOT locate vent terminal too close to shrubbery, as flue gases may damage them.

Caulk all cracks, seams and joints within six (6) feet (1.8 m) of vent terminal.

Caulk around thimble face plate for weather tight seal.

All painted surfaces should be primed to lessen the chance of physical damage. Painted surfaces will require maintenance.

Insulate vent pipe of water heaters exposed to cold conditions (attics, crawl spaces, etc.) with inflammable material to help prevent moisture from accumulating in vent pipe. The insulation should be rated for the temperature and should not contain substances that corrode the vent pipe.

Do NOT extend exposed vent pipe of indoor water heaters outside of building.

Guard vent against accidental contact with people and pets.

Install outdoor water heater such that air inlet and flue outlet is above anticipated snow level.

13

Image 13
Contents Defects or other reproductive harm Tankless Water HeaterThat will result in death or serious You can find them on a label on the applianceInjury Install and Properly Vent the Water HEATER… N G E R Natural GAS and Liquefied Petroleum Models Read and Follow this Safety Information Carefully Location of the Outdoor water heater Installing the Outdoor water heaterLocation of Indoor Water Heater Installing the Indoor water heaterCombustion and Ventilation Air Indoor Water Heater Only Installing the water heaterCorrosive Atmospheres Inspect ShipmentVenting Lengths VentingMaximum Vent Length Minimum Vent Length The ventingAppliance Vent Adapter Venting Through Closed SpacesDraining the Condensate Horizontal Vent Terminal Location Canadian InstallationsAdditional Considerations Indoor Water HeaterVent Horizontal Wall Thimble Installation Vertical Vent Termination Location Vertical Vent InstallationThermal Expansion Mounting the Water HeaterWater Supply Connections Lines.Relief Inlet Relief ValvePressure Testing the Gas Supply System Leak TestingGas Supply High AltitudeRemote Control Installation Connecting the remote control to the water heater Remote Control InstallationIndoor water heaters only Electrical ConnectionIndoor or Outdoor water heaters Indoor Models SwitchDuring Installation of this water heater… Hot and Cold Pipe Insulation InstallationInsulation Blankets Do’sInstallation Check List To Turn OFF GAS to Appliance Lighting the water heaterWater Temperature Setting Safety PrecautionsTime/Temperature Relationship in Scalds Operating the water heaterWater Temperature Setting… Housekeeping Routine Preventative MaintenanceDrain heater. See Draining Water Heater section on Burner Inspection Venting System InspectionVacation and Extended Shut-Down Condensate Trap InspectionFreeze Protection Draining the Water HeaterBefore You Call For Service… Outdoor Water Heater Only Indoor Water Heater OnlyInstructions For Placing a Parts Order Replacement PartsTemperature Setting DIP Switch Adjustment If YOU Need Service

RUTG2-42(PVN)(PVP), RUTG2-53-(PVN)(PVP)(XN)(XP), RTG2-53-(PVN)(PVP)(XN)(XP), PH-16(FISN)(FISP), RMTG2-53-(PVN)(PVP)(XN)(XP) specifications

Rheem’s innovative line of tankless water heaters, including the PTG2-42(PVN)(PVP), RTG2-42(PVN)(PVP), PH20R-(IFSN)(IFSP)(OFN)(OFP), RMTG2-42(PVN)(PVP), and RMTG2-53-(PVN)(PVP)(XN)(XP), represents a significant advancement in residential and commercial water heating technologies. These models are designed to deliver hot water on demand, ensuring efficiency and convenience while minimizing energy consumption.

One of the standout features of these Rheem models is their energy efficiency. Employing advanced condensing technology, they are capable of converting up to 98% of the energy consumed into hot water. This impressive efficiency reduces utility bills and makes them an environmentally friendly choice compared to traditional tank water heaters.

The PTG2 and RTG2 series are particularly versatile, accommodating various installation needs. Their compact design allows for both indoor and outdoor installation, making them ideal for homes with limited space. Additionally, they are equipped with a multiple venting option, which provides flexibility in installation locations.

The PH20R series incorporates Rheem’s proprietary modeling and simulation technologies to optimize performance. These models feature enhanced safety functions and user-friendly digital controls, allowing homeowners to easily set and monitor their water temperatures. The ease of use extends to maintenance as well, as many components are accessible for routine checks and cleaning.

Another significant advantage of the RMTG2 models is their integrated Wi-Fi connectivity, enabling users to manage their water heating systems remotely through Rheem’s mobile app. This smart technology provides real-time data, alerts, and allows for temperature adjustments, ensuring that users always have hot water when they need it.

Rheem’s tankless water heaters also boast a robust warranty, a testament to their durability and reliability. With options that cater to various household sizes and hot water needs, these models can provide continuous hot water for homes with multiple bathrooms and heavy consumption.

For those seeking cost-effective, efficient, and smart water heating solutions, the Rheem PTG2, RTG2, PH20R, RMTG2-42, and RMTG2-53 series stand out as top contenders in the market. Their combination of advanced technology, energy savings, and user-friendly features position them as industry leaders, providing long-term benefits for any homeowner.