Enerco HST45 owner manual Operation, Use LP-resistant joint compound on all threads, Heater

Page 18

when such use is in compliance with local codes. All pipe, tube and fittings should be new and free from defects. Carefully ream the pipe and tube ends to remove obstructions and burrs.

3.Use LP-resistant joint compound on all threads.

4.Check the pipe and tube connections for leaks before placing heating equipment into service. When checking for gas leaks, use a soap and water solution; never use an open flame.

NOTE: A plugged 1/8” NPT tapping must be provided upstream of the gas supply to the heater. The gas supply line connecting to the heater appliance should be such that it allows for some movement of the unit. The appliance will go through expansion and contraction during a heating cycle.

Section 5 OPERATION

Supplied by others

Heater

Flex Pipe

Enerco Group, Inc., Gas-Fired Low-Intensity Infrared Heater

Operating Instructions and Owner’s Manual

Image 18

Contents MR. Heater Contents Unpacking the Heater Available AccessoriesBefore YOU Begin IntroductionAbout The Heater Rear ViewVenting Specifications Technical SpecificationsHeater Specifications Side View End ViewInstaller’s responsibility Where can the heater be installed?Where can’t the heater be installed? Gas Service Requirements System RequirementsGrounding Electrical Service Requirements System RequirementsNon-residential Installations Venting RequirementsInstallation Tools InstallationSafety Equipment Installation MaterialsGeneral Guidelines Residential Horizontal InstallationsTilted Installations Minimum Required Safe Distances from CombustiblesHang the Heater Horizontal InstallationTilted Installation Heater OrientationMHT / HST Heater Assembly Instructions Typical Installation Canadian Installations1 US Installations2Venting Basic Flue Venting Residential Only Vertical Through the Roof10 ft Venting/Ducting Roof PitchHorizontal Through the Sidewall Single wall vent run Single wall terminal end Vertical VentingSingle Wall Double WallOutside Combustion Air Supply Electrical Service InstallationAir For Combustion Residential Direct Outside Air For Combustion ResidentialGas Service Installation Install Gas Supply Lines120V-60Hz Supply Circuit Operation Use LP-resistant joint compound on all threadsHeater Maintenance Pre-Season Maintenance Operation of the HeaterProper Operating Flame Blower does not Come on TroubleshootingReplace fuse or reset circuit breaker Replace blower motor Igniter does not SparkBurner does not Light Burner does not Stay LITIllustrated Parts Illustrated PartsMHT-45 HST-45 MHT /HST45 Tube Heater Operating Instructions

HST45 specifications

The Enerco HST45 is a high-efficiency heating solution that has gained popularity among consumers looking for effective solutions for their heating needs. This advanced heating system combines innovative technologies and user-friendly features to deliver optimal performance while ensuring energy savings.

One of the standout characteristics of the Enerco HST45 is its robust heating capacity. With the ability to deliver up to 45,000 BTUs, it is designed to effectively heat large spaces, making it an ideal choice for commercial applications and residential use. The unit operates on a propane or natural gas fuel system, providing flexibility in fuel choice based on user availability and preference.

The HST45 is equipped with a cutting-edge infrared heating technology. This system works by directly heating objects and surfaces in a room rather than just circulating warm air. This method results in faster and more efficient heating, reducing energy consumption and providing comfortable warmth even in large or poorly insulated spaces.

Another key feature of the Enerco HST45 is its portability. Designed with ease of movement in mind, it comes with sturdy wheels, allowing users to conveniently transport it to different locations as needed. This makes it a versatile option for construction sites, garages, workshops, and outdoor events.

Safety is also a primary consideration in the design of the HST45. The unit is equipped with an automatic shut-off feature that activates in the event of overheating, ensuring the safety of users and surroundings. Additionally, it includes a protective grill to prevent accidental contact with the heating elements, further enhancing user safety.

User-friendly controls contribute to the overall appeal of the Enerco HST45. The system features easy-to-read gauges and straightforward controls that enable users to adjust the temperature and settings according to their preferences without hassle.

Moreover, the HST45 is designed for durability and longevity, made from high-quality materials that can withstand various environmental conditions. Its sturdy construction helps ensure reliable performance through years of use, making it a worthwhile investment for anyone in need of a dependable heating solution.

In summary, the Enerco HST45 combines powerful heating capabilities, innovative infrared technology, portability, and user safety features, making it an exceptional choice for those seeking effective heating solutions. Its durability and efficiency further enhance its appeal, positioning it as a leader in portable heating systems. As energy efficiency and versatility become increasingly paramount, the Enerco HST45 stands out as a reliable and effective heating option for various applications.