Enerco HST45 owner manual Operating Instructions

Page 24

MR. HEATER

MOD

MHT 45

EL

 

OPERATING INSTRUCTIONS

HEATSTAR

AND OWNER’S MANUAL

MODEL

HST 45

WARNING:

USE ONLY MANUFACTURER’S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. REPLACEMENT PARTS ARE ONLY AVAILABLE DIRECT FROM THE FACTORY AND MUST BE INSTALLED BY A QUALIFIED SERVICE AGENCY.

FOR INFORMATION REGARDING SERVICE OR PARTS:

Contact your local heating service technician or dealer.

FOR ADDITIONAL INFORMATION:

Please call Toll-Free 800-251-0001 -WWW.mrheater.com or WWW.enerco.com

Our office hours are 8:30 AM — 5:00 PM, EST, Monday through Friday.

Please have the model number, serial number and date of purchase ready.

LIMITED WARRANTY

The company warrants this product to be free from imperfections in material or workmanship, under normal and proper use in accordance with instructions of The Company, for a period of one year from the date of delivery to the buyer. The Company, at its option, will repair or replace products returned by the buyer to the factory, transportation prepaid within said one year period and found by the Company to have imperfections in material or workmanship.

If a part is damaged or missing, call our Customer Service Department at 800-251-0001.

Address any Warranty Claims to the Customer Service Department, EGI 4560 W.

160th ST., CLEVELAND, OHIO 44135. Include your name, address and telephone number and include details concerning the claim. Also, supply us with the purchase date and the name and address of the dealer from whom you purchased our product.

The foregoing is the full extent of the responsibility of the Company. There are no other warranties, express or implied. Specifically there is no warranty of fitness for a particular purpose and there is no warranty of merchantability. In no event shall the Company be liable for delay caused by imperfections, for consequential damages, or for any charges of the expense of any nature incurred without its written consent. The cost of repair or replacement shall be the exclusive remedy for any breach of warranty. There is no warranty against infringement of the like and no implied warranty arising from course of dealing or usage of trade. This warranty will not apply to any product which has been repaired or altered outside of the factory in any respect which in our judgment affects its condition or operation.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from state to state.

EGI., reserves the right to make changes at any time, without notice or obligation, in colors, specifications, accessories, materials and models.

Enerco Group, Inc., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 216-916-3000 © 2003, Mr. Heater. All rights reserved

CSA REQUIREMENT 7-89

ANSI Z21.86B 2002

ANS Z83.20 • CSA 2.34-2003

Enerco Group, Inc., Gas-Fired Low-Intensity Infrared Heater

24

Operating Instructions and Owner’s Manual

Page 23 Page 24
Image 24
Page 23 Page 24
Contents MR. Heater Contents Available Accessories Before YOU BeginUnpacking the Heater IntroductionAbout The Heater Rear ViewTechnical Specifications Heater SpecificationsVenting Specifications Side View End ViewWhere can the heater be installed? Where can’t the heater be installed?Installer’s responsibility Gas Service Requirements System RequirementsElectrical Service Requirements System Requirements Non-residential InstallationsGrounding Venting RequirementsInstallation Safety EquipmentInstallation Tools Installation MaterialsHorizontal Installations Tilted InstallationsGeneral Guidelines Residential Minimum Required Safe Distances from CombustiblesHorizontal Installation Tilted InstallationHang the Heater Heater OrientationMHT / HST Heater Assembly Instructions Typical Installation Canadian Installations1 US Installations2Venting Basic Flue Venting Residential Only Vertical Through the Roof10 ft Venting/Ducting Roof PitchHorizontal Through the Sidewall Vertical Venting Single WallSingle wall vent run Single wall terminal end Double WallElectrical Service Installation Air For Combustion ResidentialOutside Combustion Air Supply Direct Outside Air For Combustion ResidentialGas Service Installation Install Gas Supply Lines120V-60Hz Supply Circuit Operation Use LP-resistant joint compound on all threadsHeater Maintenance Pre-Season Maintenance Operation of the HeaterProper Operating Flame Troubleshooting Replace fuse or reset circuit breaker Replace blower motorBlower does not Come on Igniter does not SparkBurner does not Light Burner does not Stay LITIllustrated Parts Illustrated PartsMHT-45 HST-45 MHT /HST45 Tube Heater Operating Instructions

HST45 specifications

The Enerco HST45 is a high-efficiency heating solution that has gained popularity among consumers looking for effective solutions for their heating needs. This advanced heating system combines innovative technologies and user-friendly features to deliver optimal performance while ensuring energy savings.

One of the standout characteristics of the Enerco HST45 is its robust heating capacity. With the ability to deliver up to 45,000 BTUs, it is designed to effectively heat large spaces, making it an ideal choice for commercial applications and residential use. The unit operates on a propane or natural gas fuel system, providing flexibility in fuel choice based on user availability and preference.

The HST45 is equipped with a cutting-edge infrared heating technology. This system works by directly heating objects and surfaces in a room rather than just circulating warm air. This method results in faster and more efficient heating, reducing energy consumption and providing comfortable warmth even in large or poorly insulated spaces.

Another key feature of the Enerco HST45 is its portability. Designed with ease of movement in mind, it comes with sturdy wheels, allowing users to conveniently transport it to different locations as needed. This makes it a versatile option for construction sites, garages, workshops, and outdoor events.

Safety is also a primary consideration in the design of the HST45. The unit is equipped with an automatic shut-off feature that activates in the event of overheating, ensuring the safety of users and surroundings. Additionally, it includes a protective grill to prevent accidental contact with the heating elements, further enhancing user safety.

User-friendly controls contribute to the overall appeal of the Enerco HST45. The system features easy-to-read gauges and straightforward controls that enable users to adjust the temperature and settings according to their preferences without hassle.

Moreover, the HST45 is designed for durability and longevity, made from high-quality materials that can withstand various environmental conditions. Its sturdy construction helps ensure reliable performance through years of use, making it a worthwhile investment for anyone in need of a dependable heating solution.

In summary, the Enerco HST45 combines powerful heating capabilities, innovative infrared technology, portability, and user safety features, making it an exceptional choice for those seeking effective heating solutions. Its durability and efficiency further enhance its appeal, positioning it as a leader in portable heating systems. As energy efficiency and versatility become increasingly paramount, the Enerco HST45 stands out as a reliable and effective heating option for various applications.
Top Page Image Contents