Hang the Heater, Heater Orientation

Hang the Heater

Residential garages come in a variety of sizes, shapes, styles and methods of construction. Because of all these variables, it is not possible to include mounting hardware with the MHT / HST heater. Although wooden rafters and joists are the most common overhead structural members in residential garage applications, other structural configurations are also illustrated below.

In the typical suspension methods shown below, lengths of chain are shown as a means of lowering the heater. However, for most residential applications it may not be necessary to lower the heater. Instead, it may be possible to screw hook-type hardware into the underside of a beam. The exposed hook could directly engage one of the two mounting holes in the front fixed hanger, while another hook could engage in one of the three suspension loops of the rear movable hanger.

Whichever method of suspension is selected, the two required suspension points must be capable of supporting a minimum of 150 pounds each.

Wood Beam

Most common for residential applications

Threaded Hook

Screw Hook	Beam Clamp	Bar Joist Clip	Concrete Beam
min. 3/8" (10 mm)	Beam Clamp
min. 3/8" (10 mm)
Washer	I-Beam	Truss
Locknut			Anchor
			Anchor
Washer
Wood Beam

As Req'd

S-Hook

Most common for non-residential applications

Heater Orientation

The MHT / HST tube heater may be installed in any of the three orientations indicated below. Select the heater orientation that is best

suited for the location that you have chosen for your heater.

•Horizontally

•Tilted 45° Right

•Tilted 45°° Left

NOTE: If the heater is going to be vented through the roof, be sure to carefully review the roof option installa- tion portion of this section. Ensure that the selected mounting site will satisfy the measurement param- eters (vent length not to exceed 25 feet) described in that section.

Horizontal Installation

1.Using S-hooks, attach two equal lengths of 2/0 chain, or equivalent, to the two uppermost holes in the front fixed hanger.

2.Slip the free end of both chains onto another S-hook, as shown.

3.The uppermost S-hook can now be installed on the suspension hardware that you have installed for suspension of the unit. An additional length of chain may also now be installed, if required, to lower the heater.

NOTE: The hook portion of hook-type suspension hardware may directly engage the two holes in the front fixed hanger and the center loop of the rear moveable hanger.

Front Fixed Hanger

Rear Movable Hanger

45° Tilted Installation

1.Determine if the heater is going to be tilted left, or tilted right. The front and rear suspension points selected must be on the same side (left or right) of the heater as shown below.

2.Attach suspension hooks and/or chains to the selected suspension points of the heater.

Use these two suspension points for Tilted 45 ° Right Installation

Tilted Right

Use these two suspension points for

Tilted 45 ° Left Installation

Tilted Left

Enerco Group, Inc., Gas-Fired Low-Intensity Infrared Heater

Operating Instructions and Owner’s Manual

HST45 specifications

The Enerco HST45 is a high-efficiency heating solution that has gained popularity among consumers looking for effective solutions for their heating needs. This advanced heating system combines innovative technologies and user-friendly features to deliver optimal performance while ensuring energy savings.

One of the standout characteristics of the Enerco HST45 is its robust heating capacity. With the ability to deliver up to 45,000 BTUs, it is designed to effectively heat large spaces, making it an ideal choice for commercial applications and residential use. The unit operates on a propane or natural gas fuel system, providing flexibility in fuel choice based on user availability and preference.

The HST45 is equipped with a cutting-edge infrared heating technology. This system works by directly heating objects and surfaces in a room rather than just circulating warm air. This method results in faster and more efficient heating, reducing energy consumption and providing comfortable warmth even in large or poorly insulated spaces.

Another key feature of the Enerco HST45 is its portability. Designed with ease of movement in mind, it comes with sturdy wheels, allowing users to conveniently transport it to different locations as needed. This makes it a versatile option for construction sites, garages, workshops, and outdoor events.

Safety is also a primary consideration in the design of the HST45. The unit is equipped with an automatic shut-off feature that activates in the event of overheating, ensuring the safety of users and surroundings. Additionally, it includes a protective grill to prevent accidental contact with the heating elements, further enhancing user safety.

User-friendly controls contribute to the overall appeal of the Enerco HST45. The system features easy-to-read gauges and straightforward controls that enable users to adjust the temperature and settings according to their preferences without hassle.

Moreover, the HST45 is designed for durability and longevity, made from high-quality materials that can withstand various environmental conditions. Its sturdy construction helps ensure reliable performance through years of use, making it a worthwhile investment for anyone in need of a dependable heating solution.

In summary, the Enerco HST45 combines powerful heating capabilities, innovative infrared technology, portability, and user safety features, making it an exceptional choice for those seeking effective heating solutions. Its durability and efficiency further enhance its appeal, positioning it as a leader in portable heating systems. As energy efficiency and versatility become increasingly paramount, the Enerco HST45 stands out as a reliable and effective heating option for various applications.