Desa VVSA18R, VVSA24R, VVDA24R Product Identification Local Codes, Unpacking, Product Feature

Page 3

OWNER’S MANUAL

PRODUCT IDENTIFICATION

LOCAL CODES

Install and use log set with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANS Z223.1, also known as NFPA 54*.

Grate

Burner

Pan

Burner

Clamp

Burner

Manifold

Figure 1 - Product Identification (VVDA24 Shown)

Grate Steps

O

 

F

NO

F

TOL

P

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

UNPACKING

CAUTION: Do not remove the metal data plates from the burner pan. The data plates contain im- portant product information.

1.Remove logs, hearth kit, pan materials, and hardware from carton.

2.Remove all protective packaging ap- plied to logs and base for shipment.

3.Check all items for any shipping dam- age. If damaged, promptly inform dealer where you bought the product.

Hearth Kit Model ______________________________________

Serial Number ________________________________________

Log Set Model ________________________________________

PRODUCT

FEATURE

REMOTE READY SAFETY VALVE/PILOT

This unit is provided with a milivolt remote ready control valve which may be con- nected to optional remote accessories for wall switch or wireless operation (see Ac- cessories, page 22).

Unit is tested and approved to ANS Z21.60- 1996 and CGA 2.26-M96as a vented decora- tive appliance. It is supplied with the parts and instructions to convert to propane/LP gas use.

901272

3

Image 3
Contents VVDA24R, and VVDA30R What to do if YOU Smell GASFor Use with Log Sets Models VVSA18RVented GAS Logs Safety InformationUnpacking Product FeatureRemote Ready Safety VALVE/PILOT Product Identification Local CodesConfined and Unconfined Space AIR for Combustion and VentilationProviding Adequate Ventilation Unusually Tight ConstructionAIR for Combustion Ventilation Determining FRESH-AIR Flow for Appliance LocationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Outdoors Ventilation AIRVentilation Air From Inside BuildingCheck GAS Type InstallationFlue Opening Specifications Venting Specifications for InstallationPressure Testing Gas Supply Piping System Installing Damper ClampConnecting to GAS Supply Installation Items NeededHearth KIT Assembly and Installation Kit AssemblyTest Pressures Equal To or Less Than 1/2 Psig Adjusting Regulator Pressure For Propane/LP Conversion Propane/LP Gas ConversionBurner Inlet Fitting Changing Pilot Orifice Remote Control OptionsTesting Burner for Leaks No Optional AccessoriesAdding PAN Material Installing the Grate and LogsFor Your Safety Read Before Lighting Operating ApplianceShutting Off Appliance Manual Lighting ProcedureLighting Instructions To Turn OFF GAS To ApplianceGhrc Operation GWMS2 Wall Mounted Switch OptionalCuring Logs Optional Remote OperationObserved Problem Possible Cause Remedy TroubleshootingClean pilot see Cleaning and Mainte Gas leak. See Warning statement at TopModels VVSA18R VVSA24R, VVDA18R VVDA24R, and VVDA30R Illustrated Parts BreakdownParts List LOG SET Models VSLR18, VSLR24, VDLCR18, VDLCR24, and VDLCR30 Parts List Cleaning and Maintenance Replacement PartsAccessories 901272 International Warranty Information