Fostex CR500 owner manual Press the ENTER/YES key again, Using the numeric keys

Page 15

CD-R/RW MASTER RECORDER CR500 (Preparation before using the CR500)

The display now shows the "SYS SETUP" menu, where "Default File Name " is highlighted.

4)Use the [MENU] dial to scroll through the menu and highlight "Adjust RTC ", then press the [ENTER/YES] key.

The display now shows current clock data which runs in realtime.

5)Press the [ENTER/YES] key again.

The clock data at the moment when pressing the key is hold and now you can edit the clock data.

flashing

6)Edit date/time data using the [MENU] dial or the numeric keys.

• Using the [MENU] dial:

You can edit the value at the cursor (highlighted) position. To move the

cursor, use the [SKIP CURSOR ] key.

• Using the numeric keys:

Each time you press any numeric key, the entered numbers move left from the cursor position.

For example, if you change the currently held data to "06Y 04M 01D 10h 00m 00s", press keys in the following order.

0 -> 6 -> 0 -> 4 -> 0 -> 1 -> 1 -> 0 -> 0 -> 0 -> 0 -> 0

7)After editing date/time data, press the [ENTER/YES] key.

The clock starts running from the entered date/time, while the display returns to the screen which shows current clock data which runs in realtime.

<Note>: If you enter illegal data in step 6) above and press the [ENTER/ YES] key, the display shows "Void data!" and the display returns to the screen where you can edit data. En- ter legal data and press the [ENTER/ YES] key.

8)Press the [STOP/HOME] key to exit the MENU mode.

<Lithium battery replacement>

The unit has an internal lithium battery which is used for driving the realtime clock. The battery life is approximately five years. The battery replacement is done by local Fostex distributor's service department or their authorized service agent.

<Note>: The file creation date of the CR500 is recorded according to the internal realtime clock. However, because "GMT" of "UDF" is set to offset zero, there may be an error when reading the creation date by a PC.

UDF: Universal Disk Format

GMT:Greenwich Mean Time

15

Image 15
Contents 8588076000 CD-R/RW Master RecorderCD-R/RW Master Recorder CR500 Safety instructions/Contents Safety InstructionsImportant Safety Instructions Table of contents Playback in the Memory Play mode Recording aWAV fileSelecting a song to be played back About Menu mode SYS Setup menu Play Setup menuDisk Utility menu About this manual Precautions on installation CD-R/RW Master Recorder CR500 Overview OverviewSupporting two recording formats Main featuresHigh-performance CD-R/RW drive built Various playback modesEasy-to-see large display and level meters Fader start function USB keyboard can be used for file name entry, etc Versatile analog and digital connectability For worldwide usePreparation before using the CR500 Press the ENTER/YES key Power connectionRealtime clock setting Press the Power switch to turn on the CR500Using the numeric keys Press the ENTER/YES key againAfter editing date/time data, press the ENTER/YES key Handling of CD-R/RW discs Initial format of the CD-R/RW discUsable discs Format typesCD-DA format audio CD including a commercially available CD Unformatted CD-R/RW discUnused formatted CD-R/RW disc Recorded CD-R/RW discInitial format of a disc Recordable time and the maximum number of tracksPress the OPEN/CLOSE key to open the disc tray Use the numeric keys or Menu dial to edit the volume label Page Format type Adjusting display contrast Weak contrastStrong contrast Front panel section Rear panel section Screen details Front panelRear panel CD-R/RW Master Recorder CR500 Names and functionsAbout Non-shift mode and Shift mode Front panel sectionAudio file and audio track Key LCD displayDISPLAY/ Contrast key EXIT/NO key Memory Play modeCLEAR/+10 key Shift keyMenu dial/ENTER/YES key SKIP/CURSOR keysTransport control keys OPEN/CLOSE key REC RDY keyLevel meters Repeat keyRear panel section Track remaining time Screen detailsTime information Disc elapsed timeWAV file Play modeFile name Total time indication examplePlayback FS/Playback bit Audio file or audio track informationInput selection Record modeCurrent track Next trackFile SEL screen SYS Setup menu screenPlay Setup menu screen Disk Utility menu screenCD-R/RW Master Recorder CR500 Connection ConnectionAnalog audio device Connecting to other devicesNumeric keyboard Fader start connectionControl keys USB keyboardFunction keys Shortcut keysCD-R/RW Master Recorder CR500 Recording Finalizing ClosingConnecting a sound source Preparation for recordingBWF formatted CD-R/RW disc CD-DA formatted CD-R/RW disc Selecting the input Adjusting recording levels for analog input onlyExamples below is shown Recording a WAV file Starting recordingStopping recording Press the REC RDY key to disable the record ready mode Checking the recorded audio filePlaying back a recorded audio file While stopped, press the OPEN/CLOSE key Closing a discRecording a CD-DA track Creating an audio CD STOP/HOME key Rewind key Play key Checking the recorded audio trackPlaying back the recorded audio track Space keyFinalizing a disc Selecting a song to be played back Method 1 Using the SKIP/CURSOR keysMethod 2 Using the Memory How to use the CLEAR/+10 keyMenu list screen Method 3 Using the File SEL screenGo down the menu to the File SEL menu While stopped, press the ENTER/YES keyCD-R/RW Master Recorder CR500 Recording Playback in the Program Play mode Playback in the Memory Play modeCD-R/RW Master Recorder CR500 Playback/Locate About play mode Home screen of the ALL Play mode Playback in the ALL Play modeBackward cueing Waveform screen in the scrub modeCueing Digital scrubPlayback in the Program Play mode Creating the play list While stopped, press the ENTER/YES keyAbove To insert a song between songs in the play list Move the cursor to Play Mode and press the ENTER/YES keyDeleting a song form the play list Deleting all songs in the play listMove the cursor to Save and press the ENTER/YES key Playback in the Memory Play mode Assigning audio data to a memory While TNO is highlighted, press the ENTER/YES keyWhile Save is highlighted, press the ENTER/YES key Replacing the audio file in a memory bank Editing the start time/end time by entering time data Editing a memory nameExample when you select Start Example when you select ENDAfter entering the desired time, press the ENTER/YES key Deleting memory play data Example when you select SCRUB-EThen press the ENTER/YES key File SEL/ DIR SEL keyLocating an audio file or audio track Locate/skip functionsSkipping between audio files or audio tracks Locating the specific ABS time Locate ABS 0/Locate REC ENDSKIP/CURSOR key Locating a point by entering a time KeyAfter entering the time, press the Locate Disk Utility menu CD-R/RW Master Recorder CR500 Menu mode System Setup menuAbout Menu mode SYS Setup menu Play Setup menuMain menu name Contents About Menu modeAdjust RTC Sys User SaveSys User Load Basic procedure for using the SYS Setup menu While SYS Setup is highlighted, press the ENTER/YES keyWhile the recorder is stopped, press the ENTER/YES key Default file name setting Default File Name Selecting File name modeDefault file name Scene NAME/TAKE Number setting Unbalanced. This is the default Input selection Select InputAnalog Peak hold time setting Peak Hold Digital output signal format selection Digital OutUSB keyboard type setting Keyboard Sel Reference level setting Ref. LevelLoading SYS Setup data Sys User Load Saving SYS Setup data Sys User SaveInitializing flash memory Sys Initial Memory Initializing system memory data Sys Default SetROM version checking Version Basic procedure for using the Play Setup menu CD-R/RW Master Recorder CR500 Menu mode Play Setup menuOff Play mode selection Play Mode Repeat mode on/off RepeatOff Auto play mode on/off Auto Play Auto play on/off when powered on Power On PlayOff Recorder stops after starting up default Finalize CD-R/RW Master Recorder CR500 Menu mode Disk Utility menuWhile Format is highlighted, press the ENTER/YES key Formatting a disc FormatPress the ENTER/YES key to start formatting the disc Press the ENTER/YES key to rewrite the system file Rewriting the file system Rewrite File SysEditing a file name Edit file name Edit the file nameTo exit the Menu mode, press the STOP/ Home key Press the ENTER/YES key to delete the file Deleting an unnecessary audio file Delete FileFinalized BWF discs Restoring a deleted audio file Restore Del. FilePress any operation key on the panel Finalizing a disc FinalizeCD-R/RW Master Recorder CR500 Specifications SpecificationsCR500 main specifications Recording medium Sampling frequency fs/ Quantization bit Signal to noise ratioExternal dimensions Weight Power requirements Power consumption482 Physical dimensionsAffect of Immunity on This Equipment Declaration of EC DirectiveFor the US Customers only Fostex America Limited Warranty Shipping Fostex CO