Fostex CR500 owner manual Creating the play list, While stopped, press the ENTER/YES key, Above

Page 58

CD-R/RW MASTER RECORDER CR500 (Playback/Locate)

Creating the play list

The description below assumes that a BWF formatted disc on which more than one WAV file is recorded is loaded. However, it is also applicable to a CD-DA formatted disc on which more than one audio track is recorded.

<Note>: You can also access to the screen for setting the play list using the "PRO- GRAM SET" menu in the MENU mode. To do this, follow the procedure below.

1)While stopped, press the [ENTER/YES] key.

The unit enters the menu mode. The display shows the MENU list screen.

2)Use the [MENU] dial to highlight "PROGRAM SET " and press the [ENTER/YES] key.

The display shows the screen for setting the play list for program playback. For the procedure afterwards, see the next page.

1)Press the [SHIFT] key to turn on the Shift mode, and press the [PLAY MODE] key.

The display shows the screen for setting the play list.

2)Press the [ENTER/YES] key.

The display changes to show the song list screen.

3)Use the [MENU] dial to select a desired song and press the [ENTER/YES] key.

The selected song is set to program number 01. (In the screen example below, file 03 is set.)

<Note>: To cancel setting, press the [CLEAR/+10] key while the program number of which you want to cancel the setting is highlighted (see page 60).

4)Use the [MENU] dial to move the cursor to "02" and press the [ENTER/YES] key.

The display changes to show the song list screen, as step 2) above.

5)Use the [MENU] dial to select a desired song and press the [ENTER/YES] key, as with step

3) above.

The selected song is set to program number 02. Repeat steps 4) and 5) until all desired songs are set to the play list.

58

Page 57 Page 59
Image 58
Page 57 Page 59
Contents CD-R/RW Master Recorder 8588076000Safety Instructions CD-R/RW Master Recorder CR500 Safety instructions/ContentsImportant Safety Instructions Table of contents Recording aWAV file Playback in the Memory Play modeSelecting a song to be played back Play Setup menu About Menu mode SYS Setup menuDisk Utility menu About this manual Precautions on installation Overview CD-R/RW Master Recorder CR500 OverviewMain features Supporting two recording formatsVarious playback modes High-performance CD-R/RW drive builtEasy-to-see large display and level meters For worldwide use USB keyboard can be used for file name entry, etcVersatile analog and digital connectability Fader start functionPreparation before using the CR500 Press the Power switch to turn on the CR500 Power connectionRealtime clock setting Press the ENTER/YES keyPress the ENTER/YES key again Using the numeric keysAfter editing date/time data, press the ENTER/YES key Format types Initial format of the CD-R/RW discUsable discs Handling of CD-R/RW discsRecorded CD-R/RW disc Unformatted CD-R/RW discUnused formatted CD-R/RW disc CD-DA format audio CD including a commercially available CDRecordable time and the maximum number of tracks Initial format of a discPress the OPEN/CLOSE key to open the disc tray Use the numeric keys or Menu dial to edit the volume label Page Format type Weak contrast Adjusting display contrastStrong contrast CD-R/RW Master Recorder CR500 Names and functions Front panelRear panel Front panel section Rear panel section Screen detailsFront panel section About Non-shift mode and Shift modeAudio file and audio track LCD display KeyDISPLAY/ Contrast key Shift key Memory Play modeCLEAR/+10 key EXIT/NO keySKIP/CURSOR keys Menu dial/ENTER/YES keyTransport control keys Repeat key REC RDY keyLevel meters OPEN/CLOSE keyRear panel section Disc elapsed time Screen detailsTime information Track remaining timeTotal time indication example Play modeFile name WAV fileAudio file or audio track information Playback FS/Playback bitNext track Record modeCurrent track Input selectionDisk Utility menu screen SYS Setup menu screenPlay Setup menu screen File SEL screenConnection CD-R/RW Master Recorder CR500 ConnectionConnecting to other devices Analog audio deviceFader start connection Numeric keyboardShortcut keys USB keyboardFunction keys Control keysCD-R/RW Master Recorder CR500 Recording Closing FinalizingPreparation for recording Connecting a sound sourceBWF formatted CD-R/RW disc CD-DA formatted CD-R/RW disc Adjusting recording levels for analog input only Selecting the inputExamples below is shown Starting recording Recording a WAV fileStopping recording Checking the recorded audio file Press the REC RDY key to disable the record ready modePlaying back a recorded audio file Closing a disc While stopped, press the OPEN/CLOSE keyRecording a CD-DA track Creating an audio CD Space key Checking the recorded audio trackPlaying back the recorded audio track STOP/HOME key Rewind key Play keyFinalizing a disc How to use the CLEAR/+10 key Method 1 Using the SKIP/CURSOR keysMethod 2 Using the Memory Selecting a song to be played backWhile stopped, press the ENTER/YES key Method 3 Using the File SEL screenGo down the menu to the File SEL menu Menu list screenCD-R/RW Master Recorder CR500 Recording Playback in the Memory Play mode Playback in the Program Play modeCD-R/RW Master Recorder CR500 Playback/Locate About play mode Playback in the ALL Play mode Home screen of the ALL Play modeDigital scrub Waveform screen in the scrub modeCueing Backward cueingPlayback in the Program Play mode While stopped, press the ENTER/YES key Creating the play listAbove Move the cursor to Play Mode and press the ENTER/YES key To insert a song between songs in the play listDeleting all songs in the play list Deleting a song form the play listMove the cursor to Save and press the ENTER/YES key Playback in the Memory Play mode While TNO is highlighted, press the ENTER/YES key Assigning audio data to a memoryWhile Save is highlighted, press the ENTER/YES key Replacing the audio file in a memory bank Editing a memory name Editing the start time/end time by entering time dataExample when you select END Example when you select StartAfter entering the desired time, press the ENTER/YES key Example when you select SCRUB-E Deleting memory play dataFile SEL/ DIR SEL key Then press the ENTER/YES keyLocate/skip functions Locating an audio file or audio trackLocating the specific ABS time Locate ABS 0/Locate REC END Skipping between audio files or audio tracksSKIP/CURSOR key Key Locating a point by entering a timeAfter entering the time, press the Locate Play Setup menu CD-R/RW Master Recorder CR500 Menu mode System Setup menuAbout Menu mode SYS Setup menu Disk Utility menuAbout Menu mode Main menu name ContentsSys User Save Adjust RTCSys User Load While SYS Setup is highlighted, press the ENTER/YES key Basic procedure for using the SYS Setup menuWhile the recorder is stopped, press the ENTER/YES key Selecting File name mode Default file name setting Default File NameDefault file name Scene NAME/TAKE Number setting Input selection Select Input Unbalanced. This is the defaultAnalog Digital output signal format selection Digital Out Peak hold time setting Peak HoldReference level setting Ref. Level USB keyboard type setting Keyboard SelSaving SYS Setup data Sys User Save Loading SYS Setup data Sys User LoadInitializing system memory data Sys Default Set Initializing flash memory Sys Initial MemoryROM version checking Version CD-R/RW Master Recorder CR500 Menu mode Play Setup menu Basic procedure for using the Play Setup menuOff Repeat mode on/off Repeat Play mode selection Play ModeOff Auto play on/off when powered on Power On Play Auto play mode on/off Auto PlayOff Recorder stops after starting up default CD-R/RW Master Recorder CR500 Menu mode Disk Utility menu FinalizeFormatting a disc Format While Format is highlighted, press the ENTER/YES keyPress the ENTER/YES key to start formatting the disc Rewriting the file system Rewrite File Sys Press the ENTER/YES key to rewrite the system fileEdit the file name Editing a file name Edit file nameTo exit the Menu mode, press the STOP/ Home key Deleting an unnecessary audio file Delete File Press the ENTER/YES key to delete the fileRestoring a deleted audio file Restore Del. File Finalized BWF discsFinalizing a disc Finalize Press any operation key on the panelSpecifications CD-R/RW Master Recorder CR500 SpecificationsCR500 main specifications Power consumption Signal to noise ratioExternal dimensions Weight Power requirements Recording medium Sampling frequency fs/ Quantization bitPhysical dimensions 482Declaration of EC Directive Affect of Immunity on This EquipmentFor the US Customers only Fostex America Limited Warranty Shipping Fostex CO

CR500 specifications

The Fostex CR500 is a remarkable addition to the world of professional audio monitoring, offering an impressive blend of technology and user-friendly design. This studio monitor is engineered to deliver high-quality sound reproduction, making it an ideal choice for musicians, audio engineers, and home studio enthusiasts alike.

At the heart of the CR500 is its sophisticated driver technology. Featuring a 5-inch woofer and a 1-inch silk dome tweeter, the monitor delivers a well-balanced sound with clarity and depth. The woofer is designed to handle low frequencies with precision, providing deep bass response, while the tweeter ensures that high frequencies are reproduced smoothly, eliminating harshness and fatigue during long mixing sessions.

One of the standout features of the CR500 is its bi-amp system, which allows the woofer and tweeter to be powered separately. This amplification method minimizes distortion and enhances overall sound quality, allowing each driver to perform optimally. Additionally, the rear-firing bass port contributes to an extended low-frequency response, giving users a more immersive listening experience.

The CR500 is equipped with a range of control options, including a volume knob, high-frequency and low-frequency control, and a switch for adjusting the speaker's position in the room. This level of customization is crucial for achieving an accurate mix, as it allows users to tailor the sound to their specific environment.

In terms of connectivity, the Fostex CR500 comes with balanced XLR and TRS inputs, ensuring compatibility with a wide array of audio interfaces and mixing consoles. This flexibility makes it an excellent choice for both professional studios and home setups.

Build quality is another key aspect of the CR500. The cabinet is constructed from high-density MDF, which helps minimize cabinet resonance and unwanted vibrations. The sleek finish not only enhances its aesthetic appeal but also contributes to its durability.

Overall, the Fostex CR500 studio monitor stands out for its exceptional sound quality, robust build, and user-friendly features. It's an excellent choice for anyone looking to elevate their audio production experience, whether for music production, mixing, or mastering. With its combination of advanced technologies and thoughtful design, the CR500 is a reliable tool for achieving accurate and dynamic sound reproduction in any studio setting.
Top Page Image Contents