Fostex CR500 owner manual Play mode selection Play Mode, Repeat mode on/off Repeat, Off

Page 83
PROGRAM SET

CD-R/RW MASTER RECORDER CR500 (MENU mode: PLAY SETUP menu)

Play mode selection [Play Mode]

The "Play Mode" menu item selects the play mode.

<Note>: The play mode also can be selected using the [PLAY MODE/ PROGRAM SET ] key.

The selection using the [PLAY MODE/] key is reflected to the PLAY SETUP menu screen.

Select the "Play Mode" menu item on the PLAY SETUP menu screen and press the [ENTER/ YES] key. The current setting starts flashing (the default is "ALL") and you can now make selection. Use the [MENU] dial to select "ALL", "SINGLE", "PROGRAM" or "MEMORY" and press the [ENTER/YES] key to confirm the setting.

ALL

Sets the play mode to "ALL PLAY".

 

 

SINGLE

Set the play mode to "SINGLE PLAY".

 

 

PROGRAM

Set the play mode to "SINGLE PLAY".

When the play list is not saved, you cannot select the PROGRAM PLAY mode. If you

 

select "PROGRAM" and press the [ENTER/YES] key, your selection is ignored and the

 

play mode is set to "ALL".

 

 

MEMORY

Set the play mode to "MEMORY PLAY".

 

 

* To exit the MENU mode, press the [STOP/HOME] key.

Repeat mode on/off [Repeat]

The "Repeat" menu item selects on/off of the repeat mode.

<Note>: You can also select on/off of the repeat mode using the [REPEAT] key. The selection using the [REPEAT] key is reflected to the PLAY SETUP menu screen.

<Note>: You cannot repeat playback in the MEMORY PLAY mode.

Select the "Repeat" menu item on the PLAY SETUP menu screen and press the [ENTER/YES] key. The current setting starts flashing (the default is "Off") and you can now make selec- tion. Use the [MENU] dial to select "Off" or "On" and press the [ENTER/YES] key to confirm the setting.

On

The recorder repeats playback of the song(s) according to the current play mode until you stop.

 

 

Off

The recorder stops playback after playing back the song(s) according to the current play mode.

 

 

* To exit the MENU mode, press the [STOP/HOME] key.

83

Page 82 Page 84
Image 83
Page 82 Page 84
Contents 8588076000 CD-R/RW Master RecorderCD-R/RW Master Recorder CR500 Safety instructions/Contents Safety InstructionsImportant Safety Instructions Table of contents Selecting a song to be played back Playback in the Memory Play modeRecording aWAV file Disk Utility menu About Menu mode SYS Setup menuPlay Setup menu About this manual Precautions on installation CD-R/RW Master Recorder CR500 Overview OverviewSupporting two recording formats Main featuresEasy-to-see large display and level meters High-performance CD-R/RW drive builtVarious playback modes Fader start function USB keyboard can be used for file name entry, etcVersatile analog and digital connectability For worldwide usePreparation before using the CR500 Press the ENTER/YES key Power connectionRealtime clock setting Press the Power switch to turn on the CR500After editing date/time data, press the ENTER/YES key Using the numeric keysPress the ENTER/YES key again Handling of CD-R/RW discs Initial format of the CD-R/RW discUsable discs Format typesCD-DA format audio CD including a commercially available CD Unformatted CD-R/RW discUnused formatted CD-R/RW disc Recorded CD-R/RW discPress the OPEN/CLOSE key to open the disc tray Initial format of a discRecordable time and the maximum number of tracks Use the numeric keys or Menu dial to edit the volume label Page Format type Strong contrast Adjusting display contrastWeak contrast Front panel section Rear panel section Screen details Front panelRear panel CD-R/RW Master Recorder CR500 Names and functionsAudio file and audio track About Non-shift mode and Shift modeFront panel section DISPLAY/ Contrast key KeyLCD display EXIT/NO key Memory Play modeCLEAR/+10 key Shift keyTransport control keys Menu dial/ENTER/YES keySKIP/CURSOR keys OPEN/CLOSE key REC RDY keyLevel meters Repeat keyRear panel section Track remaining time Screen detailsTime information Disc elapsed timeWAV file Play modeFile name Total time indication examplePlayback FS/Playback bit Audio file or audio track informationInput selection Record modeCurrent track Next trackFile SEL screen SYS Setup menu screenPlay Setup menu screen Disk Utility menu screenCD-R/RW Master Recorder CR500 Connection ConnectionAnalog audio device Connecting to other devicesNumeric keyboard Fader start connectionControl keys USB keyboardFunction keys Shortcut keysCD-R/RW Master Recorder CR500 Recording Finalizing ClosingBWF formatted CD-R/RW disc CD-DA formatted CD-R/RW disc Connecting a sound sourcePreparation for recording Selecting the input Adjusting recording levels for analog input onlyExamples below is shown Stopping recording Recording a WAV fileStarting recording Playing back a recorded audio file Press the REC RDY key to disable the record ready modeChecking the recorded audio file While stopped, press the OPEN/CLOSE key Closing a discRecording a CD-DA track Creating an audio CD STOP/HOME key Rewind key Play key Checking the recorded audio trackPlaying back the recorded audio track Space keyFinalizing a disc Selecting a song to be played back Method 1 Using the SKIP/CURSOR keysMethod 2 Using the Memory How to use the CLEAR/+10 keyMenu list screen Method 3 Using the File SEL screenGo down the menu to the File SEL menu While stopped, press the ENTER/YES keyCD-R/RW Master Recorder CR500 Recording CD-R/RW Master Recorder CR500 Playback/Locate Playback in the Program Play modePlayback in the Memory Play mode About play mode Home screen of the ALL Play mode Playback in the ALL Play modeBackward cueing Waveform screen in the scrub modeCueing Digital scrubPlayback in the Program Play mode Above Creating the play listWhile stopped, press the ENTER/YES key To insert a song between songs in the play list Move the cursor to Play Mode and press the ENTER/YES keyMove the cursor to Save and press the ENTER/YES key Deleting a song form the play listDeleting all songs in the play list Playback in the Memory Play mode While Save is highlighted, press the ENTER/YES key Assigning audio data to a memoryWhile TNO is highlighted, press the ENTER/YES key Replacing the audio file in a memory bank Editing the start time/end time by entering time data Editing a memory nameAfter entering the desired time, press the ENTER/YES key Example when you select StartExample when you select END Deleting memory play data Example when you select SCRUB-EThen press the ENTER/YES key File SEL/ DIR SEL keyLocating an audio file or audio track Locate/skip functionsSKIP/CURSOR key Skipping between audio files or audio tracksLocating the specific ABS time Locate ABS 0/Locate REC END After entering the time, press the Locate Locating a point by entering a timeKey Disk Utility menu CD-R/RW Master Recorder CR500 Menu mode System Setup menuAbout Menu mode SYS Setup menu Play Setup menuMain menu name Contents About Menu modeSys User Load Adjust RTCSys User Save While the recorder is stopped, press the ENTER/YES key Basic procedure for using the SYS Setup menuWhile SYS Setup is highlighted, press the ENTER/YES key Default file name Scene NAME/TAKE Number setting Default file name setting Default File NameSelecting File name mode Analog Unbalanced. This is the defaultInput selection Select Input Peak hold time setting Peak Hold Digital output signal format selection Digital OutUSB keyboard type setting Keyboard Sel Reference level setting Ref. LevelLoading SYS Setup data Sys User Load Saving SYS Setup data Sys User SaveInitializing flash memory Sys Initial Memory Initializing system memory data Sys Default SetROM version checking Version Off Basic procedure for using the Play Setup menuCD-R/RW Master Recorder CR500 Menu mode Play Setup menu Off Play mode selection Play ModeRepeat mode on/off Repeat Off Recorder stops after starting up default Auto play mode on/off Auto PlayAuto play on/off when powered on Power On Play Finalize CD-R/RW Master Recorder CR500 Menu mode Disk Utility menuWhile Format is highlighted, press the ENTER/YES key Formatting a disc FormatPress the ENTER/YES key to start formatting the disc Press the ENTER/YES key to rewrite the system file Rewriting the file system Rewrite File SysTo exit the Menu mode, press the STOP/ Home key Editing a file name Edit file nameEdit the file name Press the ENTER/YES key to delete the file Deleting an unnecessary audio file Delete FileFinalized BWF discs Restoring a deleted audio file Restore Del. FilePress any operation key on the panel Finalizing a disc FinalizeCD-R/RW Master Recorder CR500 Specifications SpecificationsCR500 main specifications Recording medium Sampling frequency fs/ Quantization bit Signal to noise ratioExternal dimensions Weight Power requirements Power consumption482 Physical dimensionsAffect of Immunity on This Equipment Declaration of EC DirectiveFor the US Customers only Fostex America Limited Warranty Shipping Fostex CO

CR500 specifications

The Fostex CR500 is a remarkable addition to the world of professional audio monitoring, offering an impressive blend of technology and user-friendly design. This studio monitor is engineered to deliver high-quality sound reproduction, making it an ideal choice for musicians, audio engineers, and home studio enthusiasts alike.

At the heart of the CR500 is its sophisticated driver technology. Featuring a 5-inch woofer and a 1-inch silk dome tweeter, the monitor delivers a well-balanced sound with clarity and depth. The woofer is designed to handle low frequencies with precision, providing deep bass response, while the tweeter ensures that high frequencies are reproduced smoothly, eliminating harshness and fatigue during long mixing sessions.

One of the standout features of the CR500 is its bi-amp system, which allows the woofer and tweeter to be powered separately. This amplification method minimizes distortion and enhances overall sound quality, allowing each driver to perform optimally. Additionally, the rear-firing bass port contributes to an extended low-frequency response, giving users a more immersive listening experience.

The CR500 is equipped with a range of control options, including a volume knob, high-frequency and low-frequency control, and a switch for adjusting the speaker's position in the room. This level of customization is crucial for achieving an accurate mix, as it allows users to tailor the sound to their specific environment.

In terms of connectivity, the Fostex CR500 comes with balanced XLR and TRS inputs, ensuring compatibility with a wide array of audio interfaces and mixing consoles. This flexibility makes it an excellent choice for both professional studios and home setups.

Build quality is another key aspect of the CR500. The cabinet is constructed from high-density MDF, which helps minimize cabinet resonance and unwanted vibrations. The sleek finish not only enhances its aesthetic appeal but also contributes to its durability.

Overall, the Fostex CR500 studio monitor stands out for its exceptional sound quality, robust build, and user-friendly features. It's an excellent choice for anyone looking to elevate their audio production experience, whether for music production, mixing, or mastering. With its combination of advanced technologies and thoughtful design, the CR500 is a reliable tool for achieving accurate and dynamic sound reproduction in any studio setting.
Top Page Image Contents