Fostex CR500 Editing a memory name, Editing the start time/end time by entering time data

CD-R/RW MASTER RECORDER CR500 (Playback/Locate)

Editing a memory name

By default, the original file name is set as the memory name in a memory bank. You can edit this name. The following description assumes that at lease one memory bank has audio data and the display shows the Home screen of the MEMORY PLAY mode.

1)Press the [SHIFT] key to turn on the Shift mode, and specify the memory bank you want to edit by pressing the corresponding numeric key in the [MEMORY] key group.

For example, if you press the [1/space] key, the display changes to show the setting screen for memory bank 1 (MEMORY 1).

flashing

3)Edit the memory name.

Use the [SKIP/CURSOR ] keys to move the cursor point (flashing point).

Use the numeric ([MEMORY]) keys or [MENU] dial to select the desired character of the flashing point.

Pressing the [CLEAR/+10] key deletes the immediate right character of the flashing point.

Therefore, by pressing the [CLEAR/+10] key repeatedly when the leftmost character flashes, you can delete the whole current name.

2)Move the cursor to "[NAME]" and press the [ENTER/YES] key.

The rightmost digit of the current memory name starts flashing and you can now edit the name.

4)After entering the desired name, press the [ENTER/YES] key.

The old name is replaced with the new name.

5)After editing, move the cursor to "<SAVE>" and press the [ENTER/YES] key.

The display returns to the Home screen of the MEMORY PLAY mode.

<Note>: Do not forget to execute the save operation above. Otherwise, the editing is cancelled.

Editing the start time/end time by entering time data

By default, the selected song is played back from the beginning to the end of the file when MEMORY PLAY is executed by pressing a numeric key.

You can, however, edit the playback start time and end time by entering desired time data (or using digital scrub function, as described on the next page).

The following description assumes that one or more memory banks have audio data and the display shows the Home screen of the MEMORY PLAY mode.

1)Press the [SHIFT] key to turn on the Shift

mode, and specify the memory bank whose data you want to edit by pressing the corre sponding numeric key in the [MEMORY] key group.

For example, if you press the [1/space] key, the display changes to show the setting screen for memory bank 1 (MEMORY 1).

2) Move the cursor to "[START]" or "[END]" and press the [ENTER/YES] key.

To edit the playback start time, select "[START]".

To edit the playback end time, select "[END]".

64