Bradford-White Corp GX1-55S, GX2-25S manual General Information, Features

Page 18

SECTION III

GENERAL INFORMATION

FEATURES

This water heater contains the following features:

HEAT EXCHANGER -- The heat exchanger (coil) has 1” NPT female fittings.

These water heaters with single-wall heat exchangers meets the Uniform Plumbing Code for installation in all potable water systems provided that:

∙The boiler water (including additives) is practically non-toxic, having toxicity rating of class of 1 as listed in Clinical Toxicology of Commercial Products.

∙The boiler water pressure is limited to maximum 30 psig by approved relief valve.

∙The heat transfer medium is potable water or contains only substances that are recognized as safe by the U.S. Food and Drug Administration (FDA).

∙The pressure of the heat transfer medium is maintained less than the normal minimum operating pressure of the potable water system.

∙The equipment is permanently labeled to indicate that only additives recognized as safe by the FDA shall be used in the heat transfer medium.

ADJUSTABLE AQUASTAT – The temperature may be adjusted from 80°F to 160°F. The aquastat (thermostat) was adjusted to 120°F before the heater was shipped from the factory. It is recommended that lower temperatures be used to avoid the risk of scalding. Refer to the “Warnings” and the section on SCALDING in “Section VII – Operating Instructions.” It is further recommended, in all cases, that the water temperature be set for the lowest temperature that satisfies your hot water needs. This will also provide the most energy efficient operation of the water heater and minimizes scale formation.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents SINGLE-WALL Indirect Page Congratulations Section Important InformationPage If YOU Smell GAS Page Page Page Page Page Table of Contents Specifications ModelSW-2-80-L SW-80C-5 SW-2-120-L Model Gal LbsMinutes Sq Ft Compliance with the code Features General InformationPage Temperature and Pressure Relief Valve Page Page PRE-INSTALLATION UnpackingSystem Zone Control Page Domestic HOT Water Priority Component Location Appliance Location Water Connections Install Temperature and Pressure Relief Valve if not factory installedInstructions for Boiler Connections Connect Water Boiler Supply PipingWater Boiler Piping with Zone Valves Connect Steam Boiler Supply Piping Fill Boiler SystemElectrical Connections Page Aquastat Control Operating Instructions System START-UPSequence of Operations Water Temperature Adjustment Approximate TIME/TEMPERATURE Relationships in ScaldsPage Aquastat Control Page Maintenance To inspect or replace an anode Page Problem Cause Solution Trouble Shooting GuideProblem Cause Solution Parts List Part Name & Description

GX1-55S, GX2-25S specifications

Bradford-White Corporation is a well-established leader in the water heating and storage industry, renowned for its commitment to quality and innovation. Among its extensive lineup, two standout models are the GX2-25S and the GX1-55S, each designed to meet diverse residential and commercial needs.

The Bradford-White GX2-25S is a compact yet powerful gas water heater, featuring a 25-gallon capacity. It is ideal for households that need a reliable water supply without taking up excessive space. With its high-efficiency design, this model utilizes a robust combustion system to deliver rapid heating, ensuring that hot water is readily available when needed. The GX2-25S is also equipped with an innovative Hydrojet® total performance system, which minimizes sediment buildup, enhancing overall efficiency and prolonging the lifespan of the unit.

On the other hand, the GX1-55S is tailored for larger households or commercial applications, boasting a substantial 55-gallon capacity. This model is designed to meet higher demand, ensuring that multiple fixtures can be used simultaneously without compromising performance. Similar to its smaller counterpart, the GX1-55S features Bradford-White's patented Defender Safety System®, a crucial technology that enhances safety by monitoring combustion and preventing potentially dangerous scenarios, making it ideal for homes with kids or pets.

Both models are constructed with Bradford-White's renowned tank design, incorporating high-quality glass lining that offers superior protection against corrosion. This allows for improved durability and fewer maintenance concerns over the years. The insulation surrounding the tank is also advanced, providing energy savings by minimizing heat loss and ensuring that hot water is retained longer.

Additionally, both the GX2-25S and GX1-55S are designed for easy installation and maintenance. Their strategic design allows for accessibility to critical components, making servicing less of a hassle for homeowners or professionals alike.

In summary, both the Bradford-White GX2-25S and GX1-55S models exemplify the brand's dedication to quality and innovation. With a range of features like efficient heating systems, robust safety mechanisms, and durable construction, they cater to varying hot water needs while ensuring reliability and performance. Whether for residential or commercial use, these models stand out as robust solutions in the water heating market.
Top Page Image Contents