Step 4: To lower the temperature setpoint, press the “Temperature Down” button until the desired temperature is shown on the water heater display.
"Setpoint" Flashes
| °F | setpoint |
|
idle |
|
| |
Status | Operational |
| |
SELECT | SET | ||
Step 5: When the desired setpoint is reached on the water heater display, press the “Set” button to confirm the new setpoint. “Setpoint” stops flashing in the water heater display.
"Setpoint" Stops Flashing
°F | setpoint |
idle |
|
Status Operational |
|
SELECT | SET |
To Display and Change Temperature Format (˚F/˚C): | |
|
To Change Temperature Format in Display from ˚F to ˚C or ˚C to ˚F:
Step 1: While in “Service Mode”, press “Select” button until “˚F/˚C” is shown in the upper right portion of the water heater display.
| °F | °F/C° |
idle |
|
|
Status | Operational |
|
SELECT | SET | |
| 61 |
|