American Water Heater (A)BCG385T500-8N manual Test 11 Water Heater Shutting OFF below Setting

Page 37

TROUBLESHOOTING

TEST 11: WATER HEATER SHUTTING OFF BELOW SETTING

Conditions:

•Main burner ignited

•Stored water is below temperature setting more than 5° F (Tank Average).

•Power off

•Plug disconnected from heater control board receptacle E3 and E4

E3

E4

 

 

Figure 30

 

 

TEST 11

WATER HEATER SHUTTING OFF BELOW SETTING

(Water Temperature Circuit Check - Continuity)

IF

then

Continuity check pin to pin of lower temperature

See Test 4.

probe shows 1 or 0 (E4)

•

check wiring and plug connections to heater control board receptacle E4.

 

•

replace lower temperature probe.

Continuity check red wire pin to red wire pin on

See Test 4.

upper temperature sensor shows 1 or 0 (E3)

•

check wiring and plug connections to heater control board receptacle.

 

•

replace upper temperature probe.

All above checks are okay

•

Check wiring and plug connections to heater control board receptacle.

 

•

Replace upper temperature probe.

 

 

 

Servicing should only be performed by a Qualified Service Agent

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Models ABCG385T500-8N Commercial GAS Water HeatersCommercial GAS Water Heater Table of Contents Service Reminder Service WarningIntroduction QualificationsTools Required RequirementsTools Optional Water Piping Installation ConsiderationsGAS Pressure Requirements Closed Water SystemsAir Supply AIR RequirementsInstallation Considerations Make-up Air Direct Communication with Outdoors Contaminated Air Clearances Water HeaterMinimum Clearances to Combustible Surfaces Clearances ExteriorVenting Sequence of Operation Operation and ServiceElectrical Sequence 1a 1 1b Wiring DiagramYES Operating Sequence Flow ChartMeasuring Gas Pressures GAS Control ValveMain Valve Solenoid Connections Manifold Pressure AdjustmentHOT Surface Igniter HSI GAS Control VALVE/BURNER Area ViewBlower Prover Switch Table Blower Prover Switch SettingsThermostat and Ignition Control Board View White Rodgers Ignition Control Board White Rodgers Integrated Control ThermostatPRE-SERVICE Checklist Ignition Control Board Error Codes TroubleshootingSystem has locked out after 3 trials for ignition Reversed polarity in power supply Internal control board failure Igniter not sensed and/or water heater not groundedLED Indication Action Status Integrated Heater Control Display LightsConditions Test 1 120 VAC to Heater CheckThen Test 2 Polarity Check Test 3 Continuity Check of High Limit ECO Ohms Test 4 Upper Temperature Probe Continuity CheckTest 5 Calling for Heat no Blower Operation Test 6 Blower ON, no Ignition E4 Plug Test 8 Igniter HEATS, no Main Burner Test 9 Igniter HEATS, no Main Burner Test 10 Main Burner Ignition for Less than Five Seconds Test 11 Water Heater Shutting OFF below Setting Page

(A)BCG38T500-8P, (A)BCG385T500-8N specifications

The American Water Heater (A)BCG38T500-8P and (A)BCG385T500-8N are innovative options in the realm of residential water heating systems. Designed for efficiency and reliability, these water heaters are perfect for households looking for robust hot water solutions.

One of the primary features of these models is their 38-gallon capacity, which makes them suitable for medium to large households. They provide an ample supply of hot water for everyday needs such as showers, dishwashing, and laundry. With a powerful 50000 BTU gas burner, both models can heat water effectively, ensuring that users have access to hot water when they need it.

In terms of technology, both the (A)BCG38T500-8P and (A)BCG385T500-8N are designed with advanced, environmentally-friendly features. Their efficient design helps reduce energy consumption, making them compliant with Energy Star standards. This not only ensures that users save on utility bills but also contributes to a more sustainable approach to water heating.

The construction of these water heaters is robust, typically featuring a glass-lined tank to prevent corrosion and extend the lifespan of the unit. The exterior is designed to withstand the rigors of time while providing excellent insulation to minimize heat loss. Both models are also equipped with a durable anode rod that further enhances corrosion resistance.

Safety is another critical characteristic of the (A)BCG38T500-8P and (A)BCG385T500-8N. They include safety features such as a temperature and pressure relief valve, ensuring that the system operates safely under various conditions. Additionally, these models often come with a 6-year limited warranty, providing peace of mind for homeowners.

Installation is straightforward, as these water heaters are designed to fit standard plumbing setups. They also offer a range of adjustable settings, allowing homeowners to customize their hot water experience according to their specific needs.

In summary, the American Water Heater (A)BCG38T500-8P and (A)BCG385T500-8N stand out for their ample capacity, energy-efficient operation, durable construction, and safety features. They represent a reliable choice for those seeking effective and long-lasting water heating solutions in their homes.
Top Page Image Contents