Adjustment Guides continued, Garage | Genie TRILOG 1200/1500

6 Maintenance and Adjustments

Adjustment Guides (continued)	LED indicator colors:	OFF	Blue	Purple	Red
	LED indicator colors:	OFF	Blue	Purple	Red
Speed Settings (DC motors only)
Speed settings are pre-programmed at the factory for the maximum
speed. Speed settings should not need adjustment with this unit.
However, travel speed for the opener can be adjusted to a slower
speed in both the Open and Close directions, to minimize wear on
heavier sectional doors.
NoTE: One-piece doors are automatically set to the slowest speed	Note: PowerLift® 900, GPower™ 900 openers DO NOT have speed
during Limits programming and cannot be adjusted.	adjustments.
There are 3-speed settings available for sectional doors. Please note	Locating Safe-T-Beam Pairs:
that speed may be affected by door weight and balance, along with	Source (Red LED) and Sensor (Green LED)
condition of door components and tracks.

Sun

Speed Adjustment

	Action		LED Indication/Result
1	Press and hold for	PROGRAM
	about 10 seconds
	or until both LEDs	SET		BLUE BLUE
	turn BLUE.	SET		BLUE BLUE
	Then release.
2	Press twice.
				BLUE BLUE
3	Press and	PROGRAM
	release.		OFF	Flashes BLUE 3 Times
			OFF

Red	Green
LED	LED

One Door

Garage

Green	Red
LED	LED

Three Door

Garage

Green	Red	Red	Green
LED	LED	LED	LED

Two Door

Garage

Red	Green	Green	Red
LED	LED	LED	LED

SET

Then the Current Speed setting

for OPENING travel will display.

SEE CHART IN NEXT COLUMN.

Press either until

NOTE: Depending on the criteria

you reach the

mentioned above, you may not

desired setting.

have the option to increase speed.

Press and

PROGRAM

LOCKS IN OPENING SETTING.

release.

Flashes BLUE

SET

OFF

3 Times

Then the Current Speed setting

for CLOSING travel will display.

SEE CHART IN NEXT COLUMN.

Press either until

NOTE: Depending on the criteria

you reach the

mentioned above, you may not

desired setting.

have the option to increase speed.

Press and

PROGRAM

LOCKS IN CLOSING SETTING.

release.

FLASH BLUE

Both LEDs FLASH

SET

FLASH BLUE

BLUE to confirm setting.

SPEED SETTINGS DONE

Single Garage Door

•Determine which side of the garage receives direct sunlight.

•Position the Source (Red LED) on the direct sunlight side

Multiple Garage Doors

•NEVER position Safe-T-Beam modules where signals will cross.

•Place the Source (Red LED) Safe-T-Beams on adjacent doors facing in opposite directions.

NOTE: Direct sunlight creates interference with Safe-T-Beam Sensor (Green LED). Sensor modules CAN be positioned further away from door opening if necessary to avoid sunlight but no further off the wall to maintain alignment with paired Source module.

Sun

Red	Green
LED	LED

One Door

Garage

G999-393 Manual-ScrewBeltChain-EN indd 19

7/13/12 10 17 AM

TRILOG 1200/1500, SC 1200/1500, SILENTMAX 1000/1200, 1200/1500, GPOWER 900 specifications

The Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 are renowned products in the field of material handling, specifically designed to enhance efficiency and safety in various lifting applications.

The Genie TRUE is characterized by its innovative design that combines user-friendliness with advanced engineering. This model offers an impressive lift capacity while ensuring stability and performance. Its lightweight structure allows for easy maneuverability, making it ideal for both indoor and outdoor use. The Genie TRUE is equipped with a state-of-the-art control system that provides precise lifting, lowering, and positioning, ensuring maximum productivity for operators.

The GPOWER 900 and 1200 models stand out with their robust build and exceptional lifting capabilities. The GPOWER 900 is designed to handle loads up to 900 pounds, while the GPOWER 1200 can effortlessly lift up to 1200 pounds. Both models use advanced hydraulic systems for smooth operation, allowing for quick lifting cycles without compromising on power or safety. The ergonomic design of the GPOWER series minimizes operator fatigue, making it suitable for prolonged use in various work environments.

The POWERLIFT 900 and 1500 augment this lineup with their impressive features tailored for heavy-duty use. The POWERLIFT 900 can lift loads up to 900 pounds, making it ideal for medium-sized tasks. On the other hand, the POWERLIFT 1500 is engineered for heavier loads, boasting a capacity of 1500 pounds. Both models utilize cutting-edge overload protection technology, ensuring that safety is prioritized during use. Additionally, the POWERLIFT series features an intuitive interface that facilitates easy adjustments and control during operation.

Each of these models embodies the core values of Genie: reliability, innovation, and efficiency. They are designed to meet the varying demands of different industries, including construction, warehousing, and logistics. Their modular designs and interchangeable parts further enhance their versatility and longevity, making them a worthwhile investment for any business needing lifting solutions.

In summary, the Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 combine robust performance with safety and ease of use, making them ideal choices for any lifting task. Their reliability and advanced features are sure to meet the growing demands of modern workplaces.