Genie POWERLIFT 900, 1200/1500 Safety Features, opener features, Infrared Protection Function

Page 4
2 Features

2 Features

Begin here onlY after completing assembly and installation of the opener. Review the Assembly and Installation poster to ensure all steps have been performed.

Contact your Genie® Professional Dealer for an installation poster, if needed, or call 1-800-35GENIE. You may also visit www.geniecompany.com to download a PDF file.

SAFETY FEATURES

Safe-T-Beam®(STB) Non-Contact

Reversing System

Puts an invisible beam across the door opening. The door stops and reverses to the full open position if anything passes through the beam. LED indicator lights on the powerhead and on the STBs provide a self-diagnostic code if an operational problem exists.

Safe-T-Reverse®Contact Reversing System Automatically stops and reverses a closing door within two seconds of contact with an object.

Automatic ForceGuard™ Control Automatically sets the force required to fully open and close the door for maximum safety.

Watch Dog™ Monitoring System

Monitors the Safe-T-Beam®system to ensure proper functionality and will automatically stop and reverse a closing door if a problem

is detected.

Manual Emergency Release

Manually releases door from door opener. Used during a power failure or other emergency to allow manual opening and closing of door.

SmartSet™ Electronic Programming Easily adjust the programming to reduce opening speed to a desired rate, vary limits and force, and program new remotes.

Automatic Lighting System

Two bulb lighting system supplies light for safer evening exits and entries. Turns ON when door is activated and automatically turns OFF 4 minutes later.

Integrated Motion Detection (Not available on all models)

Some units have motion detection built into the powerhead. Lights automatically turn ON when motion is detected for much safer movement through the garage. Lights will turn OFF after 4 minutes of no motion.

4

opener features

INTELLICODE® 2 Access Security System A new generation superior encryption system that enhances the security of the door opener by continuously changing the access code each time the remote is used. The door opener re- sponds to each new code only once. An access code copied from a working system and tried again, will not control the door opener.

Wall Console

Operates door opener from inside garage. The wall console has an indicator light with: Open/Close, Sure-Lock™, and independent light control buttons.

Home Link and Car2U® compatible. Refer to the programming instructions on page 11.

NOTE: Use this manual ONLY after completing assembly and installation of opener. Review Assembly/Installation Instructions poster. Check that all steps have been completed.

Contact your Genie® Professional Dealer for an Assembly/Installation Instructions poster, if needed, or call 1-800-35GENIE. You can also go to www.geniecompany.com to download a printable file.

INFRARED PROTECTION FUNCTION

1.The Safe-T-Beam®has no effect on the door during an opening cycle.

2.If the Safe-T-Beam®detects an obstruction when trying to close the door, it will not allow the door to close.

3.When the garage door is closing, if Safe-T-Beam®is interrupted by a person or obstacle, the garage door will stop its downward travel and reverse automatically to its fully opened position.

4.If the Safe-T-Beam®System fails, loses power, or is installed improperly, press and hold the wall console “open/close” button until the door reaches its fully closed position. If you release the “open/close” button on the wall console during the closing movement, the door will reverse automatically to its fully-opened position.

G999-393 Manual-ScrewBeltChain-EN indd 4

7/13/12 10 17 AM

Page 3 Page 5
Image 4
Page 3 Page 5
Contents GARAGE DOOR OPENER MODELS SilentMax 1000/1200, CB 1000/1200, IntelliG 1000/1200Homelink and Car2U compatible OPERATION & MAINTENANCE MANUALSAVE THESE INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS Need help or have questions? Call usTable of Contents 1 Safety Information IMPORTANT SAFETY INSTRUCTIONSREAD THIS SAFETY INFORMATION OVERVIEW OF POTENTIAL HAZARDS2 Features SAFETY FEATURESopener features INFRARED PROTECTION FUNCTIONOverview of PoWERHEAD Controls 3 Required ProgrammingINTRODUCTION Located on bottom of PowerheadTRAVEL LIMITS Closing Garage Door Down Limitsround LED remains off will begin flashingOpening Garage Door Up Limits Release up arrow button + and the round LEDwill begin flashing PROGRAMWall Console / Overview In your carton you will find one of the following wall consolesSeries II Wall Consoles with White Buttons Series III Wall Consoles with Black ButtonsForce and Speed Control Contact Reverse AdjustmentContact Reverse Test 15 Release the Program Set button the long LED begins flashing purple REMOTES / New Intellicode 2 OpenersHOLD 2 seconds The Remote button is now programmed Repeat as necessary for additional RemotesEach Remote can be programmed for three door openers BASIC PROGRAMMING IS COMPLETE AND YOUR GARAGE DOOR IS READY TO USESetting Up a PIN Resetting PINPROGAMMING THE WIRELESS KEYPAD 4 Optional ProgrammingHOLD Clearing Memory FOR RemoTES2 seconds INTELLICODE 1 REMOTES Red = Intellicode 1 Green = IntellicodePress and release the Remote button 3 times on your older Genie door opener5 One-Piece Doors Attaching door braCket tO doorAttaching door arm tO door braCket Door centerlineMaintenance and Adjustments REGULAR MAINTENANCESAVE THESE INSTRUCTIONS Important Safety Instructions6 Maintenance and Adjustments REGULAR MAINTENANCE continuedCORRECTIVE MAINTENANCE Screw DriveDOWN FORCE FORCE Settings are resetBLUE then OFF Adjustment Guides continued Locating Safe-T-Beam PairsOne Door Garage Three Door Garage7 Wiring Diagram POWER CORDOPENING COVER MAY CAUSE ELECTRIC SHOCK ELECTRICAL SHOCKTroubleshooting OPERATION8 Troubleshooting POWERHEAD LEDS9 Warranty PowerMax 1200/1500, SC 1200/1500, TriloG 1200/1500, PowerLiftGPower 900, SilentMax 1000/1200, CB 1000/1200, IntelliG 1000/1200 LIMITED WARRANTYGenie-Net technology “tells” you Easy operation at your finger tipsConvenience, Security All in One “RETRO” REPLACEMENT
Related manuals
Manual 14 pages 5.59 Kb

TRILOG 1200/1500, SC 1200/1500, SILENTMAX 1000/1200, 1200/1500, GPOWER 900 specifications

The Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 are renowned products in the field of material handling, specifically designed to enhance efficiency and safety in various lifting applications.

The Genie TRUE is characterized by its innovative design that combines user-friendliness with advanced engineering. This model offers an impressive lift capacity while ensuring stability and performance. Its lightweight structure allows for easy maneuverability, making it ideal for both indoor and outdoor use. The Genie TRUE is equipped with a state-of-the-art control system that provides precise lifting, lowering, and positioning, ensuring maximum productivity for operators.

The GPOWER 900 and 1200 models stand out with their robust build and exceptional lifting capabilities. The GPOWER 900 is designed to handle loads up to 900 pounds, while the GPOWER 1200 can effortlessly lift up to 1200 pounds. Both models use advanced hydraulic systems for smooth operation, allowing for quick lifting cycles without compromising on power or safety. The ergonomic design of the GPOWER series minimizes operator fatigue, making it suitable for prolonged use in various work environments.

The POWERLIFT 900 and 1500 augment this lineup with their impressive features tailored for heavy-duty use. The POWERLIFT 900 can lift loads up to 900 pounds, making it ideal for medium-sized tasks. On the other hand, the POWERLIFT 1500 is engineered for heavier loads, boasting a capacity of 1500 pounds. Both models utilize cutting-edge overload protection technology, ensuring that safety is prioritized during use. Additionally, the POWERLIFT series features an intuitive interface that facilitates easy adjustments and control during operation.

Each of these models embodies the core values of Genie: reliability, innovation, and efficiency. They are designed to meet the varying demands of different industries, including construction, warehousing, and logistics. Their modular designs and interchangeable parts further enhance their versatility and longevity, making them a worthwhile investment for any business needing lifting solutions.

In summary, the Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 combine robust performance with safety and ease of use, making them ideal choices for any lifting task. Their reliability and advanced features are sure to meet the growing demands of modern workplaces.
Top Page Image Contents