Genie M-4700, M-4500 owner manual Operation of Your Opener, Homelink Transceiver

Page 23

11. OPERATION OF YOUR OPENER

Your opener can be activated via any of the following, depending on which accessories your opener system has:

■Remote Control Transmitter

■Wall Control Panel

■Doorbell-Type Pushbutton

■Keyless Entry (optional accessory p.28)

REMOTE CONTROL TRANSMITTER:

■To open or close garage door, press and hold button (Midi transmitter has an indicator light that will start blinking). See Fig. 51A. When garage door begins to move, release button.

■To stop garage door during travel, press and hold button until door stops, then release button.

■To resume garage door travel after stopping it, press and hold button until door begins to move, then release button.

WALL CONTROL PANEL:

■The illuminated Door Pushbutton will light when properly connected (if it does not light up, review section 8-11. “Install Wall Control” on page 14 or refer to “Having a Problem” on page 29).

■To open or close garage door, press and hold Illuminated Door Pushbutton. See Fig. 51B. When garage door begins to move, release button.

■To stop garage door during travel, press and hold button until door stops, then release button.

■To resume garage door travel after stopping it, press and hold button until door begins to move, then release button.

■The Light On /Off button can be used to turn lights on or off. Press light On /Off button until lights come on or turn off. Release button. When using the light On /Off button, the automatic timer is ignored, and the lights will remain on until the button is pressed again, or until the opener is activated and the automatic timer begins again.

■The Lock/Vacation button can be used to lock out all remote control transmitters. The door can still be acti- vated by wall control panel or keyless entry system. Press and hold Lock/Vacation button for 2-3 seconds. Release button. Illuminated Door Pushbutton will flash continuously while lock mode is active. To unlock opener, press and hold Lock/Vacation button for 2-3 seconds.

DOORBELL-TYPE PUSHBUTTON:

■To open or close garage door, press and hold Pushbutton. See Fig. 51C. When garage door begins to move, release button.

■To stop garage door during travel, press and hold button until door stops, then release button.

■To resume garage door travel after stopping it, press and hold button until door begins to move, then release button.

OPENER LIGHTS:

■Lights will come on whenever opener is activated. Lights will stay on for 4 minutes and 15 seconds, or until the Light On /Off button on the wall control panel is pressed, whichever is sooner.

■Lights can be turned on and off manually as described under operation of wall control panel.

■Lights will flash when the opener senses an obstruction either detected by the internal safety system or the photo eye. To stop lights from flashing, remove obstruction and operate door normally.

Fig. 51

A. 2-Channel Midi Transmitter

Indicator Light

 

Buttons

 

B. Wall Control Panel

C. Doorbell-Type Pushbutton

 

Pushbutton

Lock/Vacation

Button

Light On/Off

Button

Illuminated

Door Pushbutton

12. HOMELINK® TRANSCEIVER

Before you can use your car’s HomeLink® device to open a garage door you must transfer an active code from the transmitter to the HomeLink® Universal Transceiver. (Reference - HomeLink® Manual)

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Digital Intelligence for the Garage M-4500 Tools Introduction Advanced FeaturesImportant Safety Information Garage and Door ToolsOne-Piece Door Sectional DoorOpener Package Contents Read and Follow ALL Installation Instructions Important Installation InstructionsMeasure and Mark Door Area Installation StepsInstall Header Bracket For ONE-PIECE Doors Install Door Bracket to DoorFor Sectional Doors Additional Step for ONE-PIECE Doors only Attach Rail to Opener HeadONE-PIECE Doors Without Track Attach Rail to Header BracketPosition Opener for Mounting Sectional Doors and ONE-PIECE Doors with TrackMount Opener to Ceiling ALL ONE-PIECE Doors Connect ARM to Door and TrolleyCheck Emergency Release Sectional DoorsMounting Photo EYE to Bracket Install Photo EYE Safety SystemInstall Wall Control Panel Mounting Photo EYE Directly to WallDoorbell-Type Pushbutton Connecting Wires to Powerhead4500 Install Light Bulbs and LensesAntenna Wire Installation 40MHZ 4700Modular Receiver Connect to PowerPermanent Wiring Connection Key to Icons Corresponding LEDs SET the AdjustmentsTo Make or Change ANY Adjustment Control PanelDown Force Fig Open Travel Limit FigClose Travel Limit Fig UP Force FigAlignment Test Safety ReversalSafety Test Align and Test Photo EyesApply Labels to Inside of Garage Important Safety InstructionsCode Change TransmittersTransmitter Mounting Multiple TransmittersHomelink Transceiver Operation of Your OpenerRail Length Adjustment Tension AdjustmentSystem Parts Belt Rail AssemblyChain Rail Assembly Lamp Lens System Parts cont‘d Power Head AssemblyMidi & Mini Transmitters AccessoriesSituation Likely Cause and Solution Having a PROBLEM?LED Display After Code Problem Solution Pressing P Troubleshooting -FOR Professional Installer onlyMaintenance Steps Date Performed By Comments Maintenance and AdjustmentsMaintenance Record Opener Model Part Number Part Name Warranty InformationNeed Help or SERVICE? Warranty Service

M-4700, M-4500 specifications

The Genie M-4500 and M-4700 are advanced aerial work platforms designed to enhance productivity and safety in various industrial and construction applications. Both models are well-known for their reliability and user-friendly features, making them popular choices for operators seeking efficient solutions for elevated work tasks.

The Genie M-4500 is a compact lift designed to elevate workers and materials up to 45 feet. One of its standout features is its impressive lifting capacity of up to 1,000 pounds, enabling it to safely handle heavy loads and multiple workers at once. The M-4500 is equipped with a unique four-wheel drive system, providing excellent traction on uneven surfaces, which is particularly beneficial for outdoor applications. The hydraulic scissor lift technology utilized in the M-4500 allows for stable and smooth vertical movements, minimizing the risk of accidents and enhancing overall safety.

On the other hand, the Genie M-4700 offers even greater lifting capabilities, reaching up to 47 feet with a comparable weight capacity of up to 1,000 pounds. With its extended platform size, the M-4700 is designed for bigger work areas, accommodating more tools and equipment. This model incorporates Genie’s advanced automatic leveling system, which ensures that the platform remains stable during operation, an essential feature when working on sloped or uneven terrain. The M-4700’s power options, including electric and diesel variants, provide operators with flexibility based on the specific site requirements.

Both models feature Genie’s patented Quick Positioning System, allowing for rapid setups and adjustments, further enhancing their operational efficiency. The control systems are intuitive, designed for ease of use, ensuring that operators can navigate the platforms effortlessly. Safety is also a primary concern, with integrated fall protection features, non-slip surfaces, and emergency descent systems.

In summary, the Genie M-4500 and M-4700 are top-tier aerial work platforms that combine lifting power, stability, and user-centric design to meet the demands of modern job sites. Their robust technology, combined with advanced safety features, ensures that users can complete tasks efficiently while minimizing risks. These models cater to various applications in construction, maintenance, and more, solidifying their position as essential tools in the aerial work equipment market.
Top Page Image Contents