Genie chainmax 1200 garage door opener manual Operation and Maintenance Manual

Page 1

CHAINMAX1200

Model 4022

GARAGE DOOR OPENER

OPERATION AND MAINTENANCE MANUAL

Includes INTELLICODE® 2 Remote Control. Safe-T-Beam®System must be installed to close door. For use only with residential sectional or one piece overhead garage doors.

Homelink® and Car2U® compatible.

For Answers and Assistance:

1.800.354.3643

or visit www.geniecompany.com

WARNING: To reduce the risk of injury to persons or damage to property – Use this opener only with a one piece or sectional door.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER

Genie, Genie logo, Intellicode, Safe-T-Beam are registered trademarks of, and ChainMax is a registered trademark of GMI Holdings, Inc., dba The Genie Company.

Homelink is a registered trademark of Johnson Controls Technology Company. Car2U is a registered trademark of Lear Corporation. © The Genie Company 2011 PN# 3732050, 07/2011

Image 1
Contents Operation and Maintenance Manual Prevention Potential HazardSafety Features Opener FeaturesTable of Contents Infrared Protection Function Important Installation InstructionsClose Door Travel Limit Programming Limits & ForceOpen Door Travel Limit Test Contact Reverse TestSee round Blue LED come on Press See long Purple LED flashingSee both LEDs Flash Blue See both LEDs OFF Press Genie IntelliCode 1 remote Genie IntelliCode 1 wireless keypadSee one See long Purple LED flashingPower Head Tête DE Puissance Cabeza DE LA Energía Reference Powerhead & Rail Assembled ViewInstallation Typique SUR UNE Porte Sectionelle Typical ONE Piece Door Installation On powerhead Overview of Powerhead ControlsProgramming Buttons location Hold Press SET Overview Remotes and OptionsLights go out and Round Blue light comes on This device complies with FCC Part 15 and RSSUse this Intellicode FeaturesNew IntelliCode 2 openers 2010 IntelliCodeTransmitter Compliance Statement Maintenance & TroubleshootingDoor Balance Spring Tension Routine Monthly MaintenanceDoor Reset OPEN/CLOSE Travel LimitChange Light Bulbs Motion DETECTOR* OverviewWall Console Overview Wire routingOpen and closes door from inside garage Closed Unlock allows controls to work normallyRemote Battery Replacement Chain Tension AdjustmentChange Speed Setting Adjustment Guide Speed SettingsPowerhead LEDs Round LED Long LED Settings Change Force SettingLong LED From wall console Opener does not runOpener runs, but door Does not movePowerhead LED Possible Problem Solution Disconnect power from opener prior to removing cover Reference Circuit Wiring DiagramOpening Cover May Cause Electric Shock ChainMax 100