Genie chainmax 1200 garage door opener manual Overview Remotes and Options, Hold Press SET

Page 15

5OVERVIEW - REMOTES AND OPTIONS

WARNING

A moving door can cause serious injury or death.

1.Keep people clear of opening while door is moving.

2.Do NOT allow children to play with opener, including wall console, remote, or wireless keypad.

3.During programming, the door opener could begin to run, so keep people and objects away from the moving door and its parts. To keep the door from moving, close the door and disconnect it from the rail carriage by pulling the Emergency Release Handle. See page 19 for Release Handle operation.

LOST OR STOLEN REMOTE - CLEARING MEMORY

Clearing remotes from powerhead memory will clear ALL programmed remotes and wireless keypad.

NOTE: Follow the PROGRAM REMOTE TO POWERHEAD steps to re-enter remaining or new remotes. See page 9.

 

 

PROGRAM

+

PROGRAM

and hold

 

—

1. Press SET

 

SET

until both lights come ON BLUE. Release button.

Three Button

Remote

FIG. 5-1 Remote

See page 21 for battery changing instructions.

PROGRAM

3.Press SET again and long LED flashes

PURPLE.

2.Lights go out and Round BLUE light comes ON.

PROGRAM

+

 

—

 

SET

FCC and IC CERTIFIED

This device complies with FCC Part 15 and RSS

210 of Industry Canada. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which may be determined

by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

sRe-orient or relocate the receiver antenna.

sIncrease the separation between the opener and receiver.

sConnect the opener into an outlet on a circuit different from that to which the receiver is connected.

sConsult your local dealer.

4. Press both and

PROGRAM

+

 

 

—

simultaneously on the

 

 

SET

powerhead and hold until

 

 

both LEDs flash BLUE.

 

 

ssVerify memory is cleared. Press a remote button that was previously programmed to the powerhead. Remote will not activate door opener.

sGarage door opener will operate normally using wall console.

ssProgram remaining or new remotes as shown on page 9. Your door opener will no longer recognize any signal received from the missing remote, or any other which has not been reprogrammed to the powerhead.

©2011 The Genie Company

3/2011

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operation and Maintenance Manual Prevention Potential HazardSafety Features Opener FeaturesTable of Contents Infrared Protection Function Important Installation InstructionsClose Door Travel Limit Programming Limits & ForceOpen Door Travel Limit Test Contact Reverse TestSee long Purple LED flashing See round Blue LED come on PressSee both LEDs Flash Blue See both LEDs OFF Press See long Purple LED flashing Genie IntelliCode 1 wireless keypadGenie IntelliCode 1 remote See onePower Head Tête DE Puissance Cabeza DE LA Energía Reference Powerhead & Rail Assembled ViewInstallation Typique SUR UNE Porte Sectionelle Typical ONE Piece Door Installation Overview of Powerhead Controls On powerheadProgramming Buttons location This device complies with FCC Part 15 and RSS Overview Remotes and OptionsHold Press SET Lights go out and Round Blue light comes on2010 IntelliCode Intellicode FeaturesUse this New IntelliCode 2 openersTransmitter Compliance Statement Maintenance & TroubleshootingDoor Balance Spring Tension Routine Monthly MaintenanceMotion DETECTOR* Overview Reset OPEN/CLOSE Travel LimitDoor Change Light BulbsClosed Unlock allows controls to work normally Wire routingWall Console Overview Open and closes door from inside garageRemote Battery Replacement Chain Tension AdjustmentAdjustment Guide Speed Settings Change Speed SettingPowerhead LEDs Round LED Long LED Change Force Setting SettingsLong LED Does not move Opener does not runFrom wall console Opener runs, but doorPowerhead LED Possible Problem Solution Reference Circuit Wiring Diagram Disconnect power from opener prior to removing coverOpening Cover May Cause Electric Shock ChainMax 100

chainmax 1200 garage door opener specifications

The Genie ChainMax 1200 Garage Door Opener is a powerful and reliable solution for homeowners seeking to enhance the convenience and security of their garage space. This robust opener stands out in the market with its advanced features, impressive performance, and innovative technologies designed for ease of use.

At the heart of the Genie ChainMax 1200 is its 120-volt DC motor, which provides a strong lifting force, capable of handling garage doors up to 7 feet in height. For doors taller than 7 feet, extensions are available, ensuring versatility for various garage sizes. The opener operates quietly and efficiently, minimizing noise while maximizing performance—a crucial feature for homes with living spaces adjacent to the garage.

One of the key highlights of the ChainMax 1200 is its sturdy chain drive system, which is designed for durability and longevity. This system offers a reliable means of lifting and lowering the garage door, making it suitable for daily use without compromising on performance. The chain drive is especially effective for heavier wooden or insulated doors, ensuring safe and efficient operation.

Safety is a top priority for Genie, and the ChainMax 1200 incorporates advanced safety features, including an automatic reverse mechanism. This feature ensures that if an object is detected while the door is closing, it will reverse direction immediately, preventing accidents and protecting both people and pets. Additionally, the opener includes a security code technology that changes the access code each time the remote is used, significantly enhancing security against unauthorized access.

The Genie ChainMax 1200 also comes with convenient accessories such as a wireless keypad for secure entry, allowing users to open and close the garage door without needing a physical remote. The included two-button remote is user-friendly and designed to fit comfortably in your hand.

Installation of the ChainMax 1200 is straightforward, with a comprehensive manual and all necessary hardware included. For those keen on smart technology, optional upgrades allow for Wi-Fi connectivity, enabling users to operate their garage door through a smartphone app, enhancing remote access and control.

In summary, the Genie ChainMax 1200 Garage Door Opener combines power, safety, and convenience in one comprehensive package. With its durable construction, advanced technology, and user-friendly features, it is an excellent choice for anyone looking to improve their garage door system.
Top Page Image Contents