Harman-Kardon AVR 3000 owner manual Unswitched Outlet

Page 10

Rear Panel Connections

Video Monitor Outputs: Connect these jacks to the composite and/or S-Video input of a TV monitor or video projector to view the on- screen menus and the output of any video source selected by the receiver’s video switcher.

Front/Center Speaker Outputs: Connect these outputs to the matching + or – terminals on your front/center speakers. When making speaker connections, always make certain to maintain correct polarity by connecting the red

(+)terminals on the AVR 3000 to the red (+) terminals on the speaker and the black (–) ter- minals on the AVR 3000 to the black (–) termi- nals on the speakers. (See page 14 for more information on speaker polarity.)

Surround Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right surround speakers. When making speaker connections always make cer- tain to maintain correct polarity by connecting the red (+) terminals on the AVR 3000 to the red (+) terminals on the speakers and the black

(–)terminals on the AVR 3000 to the black (–) terminals on the speakers. See page 14 for more information on speaker polarity.

Switched AC Accessory Outlet: This out- let may be used to power any device that you wish to have turn on when the unit is turned on with the System Power Control switch 2.

Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR 3000 is on or off (in Standby), provided that the Main Power switch 1is on.

Note: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts from the

Unswitched Outlet

and 50 W from the

Switched Outlet .

 

AC Power Cord: Connect the AC plug to an unswitched AC wall output.

Remote IR Output: This connection per- mits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment.

Remote IR Input: If the AVR 3000’s front- panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.

DVD Video Inputs: Connect these jacks to the composite or S-Video output jacks on a DVD player or other video source.

Video 1 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jack on a VCR.

Video 3 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on any video source.

Video 2 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a second VCR or other video source.

Video 2 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jacks on a second VCR.

Video 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source.

Optical Digital Inputs: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal or a standard PCM digital source.

Coaxial Digital Inputs: Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD play- er to these jacks.

Video 3 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on any audio or video source.

Video 2 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source.

Video 2 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR or any Audio recorder.

Note: Either the Video or S-Video output of any S-Video source must be connected to the AVR 3000, not both in parallel, otherwise the video may be disturbed or its performance be adverse- ly effected.

10REAR PANEL CONNECTIONS

Page 9 Page 11
Image 10
Page 9 Page 11
Contents AVR 3000 Audio/ Video Receiver Table of Contents Declaration of ConformityOutput Levels for Optimum Description and FeaturesIntroduction PerformanceImportant Safety Information Safety InformationUnpacking Front Panel Controls Front Panel ControlsSee Front Panel Information Display Analog Input Indicator Preset Number/Sleep TimerFront Panel Information Display Front Panel Information Display Digital Audio Outputs Connect these Rear Panel ConnectionsRear Panel Connections Unswitched Outlet 3000 Remote Control FunctionsRemote Control Functions Channel Direct Input MuteRemote Control Functions Has been pressedDirect Input Audio Equipment Connections Installation and ConnectionsVideo Equipment Connections Important Note for Adapter Cables Volume on the TV must be reduced to minimumScart A/V Connections Important Notes for S-Video connectionsExternal Audio Power Amplifier Connections System and Power ConnectionsRemote Control Extension AC Power ConnectionsSystem Configuration System ConfigurationSpeaker Placement Speaker SelectionUsing the On-Screen Display Settings to be Made With Each Input UsedSwitched AC outlet Selecting the On-Screen displaySurround Setup Input SetupSpeaker Setup Surround Adjustments for Other Inputs Delay SettingsNight Mode Settings Logic delay should be set at twenty millisec- ondsOutput Level Adjustment Press and hold the SPL Indicator Select Using EzSetProper Outputs To turn the test tone off and return to On the remote only, not the main vol- ume controlsWill change color to indicate the level Master MenuBasic Operation Controls and Use of HeadphonesOperation Source SelectionSurround Mode Chart Dolby Digital Surround Mode SelectionDigital Audio Playback PCM Audio PlaybackSelecting a Digital Source Digital Status IndicatorsMP3 Audio Playback Rear or front panel #$. In order to proTape Recording Night ModeRecord mode Audio OutputsMemory Backup Output Level Trim AdjustmentChannel Direct Input Tuner Operation Preset TuningRecalling Preset Stations Station SelectionRDS Display Options RDS TuningRDS Operation Program Search PTYOperation Adjustment, use the ‹/› buttons E Enter this setting Advanced FeaturesTurn On Volume Level Advanced FeaturesSemi-OSD Settings Full-OSD Time Out AdjustmentDirect Code Entry Time. When the Program/SPL IndicatorProgramming the Remote with Codes Auto-Search MethodMacro Programming Erasing Macro CommandsProgramming the Remote Press the AVR SelectorProgrammed Device Functions Volume Punch-ThroughOperate the Volume Control Remote With Other DevicesTon , followed by the VID 2/TV Input Resetting the Remote MemoryChannel Control Punch-Through Selector buttonFunction List Function ListAVR DVD Setup Code Table TV Nokia NECNeckermann NordmendeSetup Code Table VCR Kenwood JensenKendo KoertingSetup Code Table CBL Code Number 3digit ListSetup Code Table CD Setup Code Table SAT Goldstar LG Setup Code Table DVDCode Number 3 Digit List RuncoProcessor Reset Troubleshooting GuideTroubleshooting Guide Technical Specifications Harman Consumer International
Top Page Image Contents