Harman-Kardon AVR 3000 owner manual Technical Specifications

Page 51

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

50 Watts per channel, 20Hz–20kHz,

@ < 0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Modes

Power Per Individual Channel

Front L&R channels:

40 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

40 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround channels:

40 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High Level)

200mV/47kohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz– 100kHz

High Instantaneous

 

Current Capability (HCC)

±25 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec**

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo: 70/65dB (DIN)

Distortion

Mono/Stereo: 0.15/0.3%

Stereo Separation

35dB @ 1kHz

Selectivity

±300kHz: 65dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

Frequency Range

520 –1611kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop: 500µV

Distortion

1kHz, 50% Mod: 0.8%

Selectivity

±9kHz: 30dB

Video Section

 

Video Format

PAL/NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency

 

Response

10Hz–8MHz (–3dB)

General

 

Power Requirement

AC 220-240V/50Hz

Power Consumption

72W idle, 470W maximum

Dimensions (Max)

 

Width

440mm

Height

167mm

Depth

435mm

Weight

14.0 kg

Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon is a registered trademark, and Power for the digital revolution is a trademark, of Harman International Industries, Inc.

TM is a trademark of Harman International Industries, Inc. (Patent No. 5,386,478).

*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” “AC-3” and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround are trademarks of Digital Theater Systems, Inc.

††UltraStereo is a trademark of UltraStereo Corp.

VMAx is a trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Lexicon, Inc.

Crystal is a registered trademark of Cirrus Logic Corp.

**Without input anti slewing and output isolation networks.

TECHNICAL SPECIFICATIONS 51

Image 51
Contents AVR 3000 Audio/ Video Receiver Declaration of Conformity Table of ContentsPerformance Description and FeaturesIntroduction Output Levels for OptimumSafety Information Important Safety InformationUnpacking Front Panel Controls Front Panel ControlsSee Analog Input Indicator Preset Number/Sleep Timer Front Panel Information DisplayFront Panel Information Display Front Panel Information Display Rear Panel Connections Digital Audio Outputs Connect theseRear Panel Connections Unswitched Outlet Channel Direct Input Mute Remote Control FunctionsRemote Control Functions 3000Has been pressed Remote Control FunctionsDirect Input Installation and Connections Audio Equipment ConnectionsVideo Equipment Connections Important Notes for S-Video connections Volume on the TV must be reduced to minimumScart A/V Connections Important Note for Adapter CablesAC Power Connections System and Power ConnectionsRemote Control Extension External Audio Power Amplifier ConnectionsSpeaker Selection System ConfigurationSpeaker Placement System ConfigurationSelecting the On-Screen display Settings to be Made With Each Input UsedSwitched AC outlet Using the On-Screen DisplayInput Setup Surround SetupSpeaker Setup Surround Delay Settings Adjustments for Other InputsLogic delay should be set at twenty millisec- onds Night Mode SettingsOutput Level Adjustment Using EzSet Press and hold the SPL Indicator SelectProper Outputs Master Menu On the remote only, not the main vol- ume controlsWill change color to indicate the level To turn the test tone off and return toSource Selection Controls and Use of HeadphonesOperation Basic OperationSurround Mode Chart PCM Audio Playback Surround Mode SelectionDigital Audio Playback Dolby DigitalRear or front panel #$. In order to pro Digital Status IndicatorsMP3 Audio Playback Selecting a Digital SourceAudio Outputs Night ModeRecord mode Tape RecordingOutput Level Trim Adjustment Memory BackupChannel Direct Input Station Selection Preset TuningRecalling Preset Stations Tuner OperationProgram Search PTY RDS TuningRDS Operation RDS Display OptionsOperation Advanced Features Advanced FeaturesTurn On Volume Level Adjustment, use the ‹/› buttons E Enter this settingFull-OSD Time Out Adjustment Semi-OSD SettingsAuto-Search Method Time. When the Program/SPL IndicatorProgramming the Remote with Codes Direct Code EntryPress the AVR Selector Erasing Macro CommandsProgramming the Remote Macro ProgrammingRemote With Other Devices Volume Punch-ThroughOperate the Volume Control Programmed Device FunctionsSelector button Resetting the Remote MemoryChannel Control Punch-Through Ton , followed by the VID 2/TV InputFunction List Function ListAVR DVD Setup Code Table TV Nordmende NECNeckermann NokiaSetup Code Table VCR Koerting JensenKendo KenwoodCode Number 3digit List Setup Code Table CBLSetup Code Table CD Setup Code Table SAT Runco Setup Code Table DVDCode Number 3 Digit List Goldstar LGTroubleshooting Guide Processor ResetTroubleshooting Guide Technical Specifications Harman Consumer International