Harman-Kardon AVR 3000 Programming the Remote, Macro Programming, Press the AVR Selector

Page 37

Programming the Remote

Macro Programming

Macros enable you to easily repeat frequently used combinations of commands with the press of a single button on the AVR 3000’s remote con- trol. Once programmed, a macro will send out up to 19 different remote codes in a pre-deter- mined sequential order enabling you to automate the process of turning on your system, changing devices, or other common tasks. The AVR’s remote can store up to five separate macro command sequences, one that is associated with the Power On button 0, and four more that are accessed by pressing the Macro buttons M.

1. Press the Mute button and the Macro button Mto be programmed or the Power-Onbutton 0at the same time. Note that the lat- est selected Input Selector will light red, and the Program/SPL Indicator 2will flash amber.

2.Enter the steps for the macro sequence by pressing the button for the actual command step. Although the macro may contain up to 19 steps, each button press, including those used to change devices, counts as a step. The Program/SPL Indicator 2will flash green to confirm each button press as you enter com- mands.

NOTE: While entering commands for Power On of any device during a macro sequence, press the

Mute button . DO NOT press the actual Power ON button.

•Remember to press the appropriate Input Selector button 4before functions are changed to another device. This is also needed for the AVR Selector button 5itself, as long as it’s not lit red and AVR functions shall be pro- grammed.

3.When all the steps have been entered, press the Sleep button 9to enter the commands. The red light under the Input Selector 45 will blink and then turn off.

Example: To program the Macro 1 Mbutton so that it turns on the AVR 3000, TV and a Sat- Receiver, follow these steps:

•Press the Macro 1 button Mand Mute buttons at the same time and then release them.

•Note that the Program/SPL Indicator will flash amber.

•Press the AVR Selector 5.

•Press the Mute button to store the AVR’s power on command.

•Press the VID 2 Input Selector button 4to indicate the next command is for “TV Power On.”

•Press the Mute button to store the TV Power On Command.

•Press the VID 3 Input Selector button 4

to indicate the next command is for “Sat-Receiver Power On.”

•Press the Mute button to store the Sat- Receiver Power On command.

•Press the Sleep/Channel Up button 9to complete the process and store the macro sequence.

After following these steps, each time you press the Macro 1 button M, the remote will send all Power On commands.

Erasing Macro Commands

To remove the commands that have been pro- grammed into one of the Macro buttons, follow these steps:

1. Press the Mute button and the Macro button Mthat contains the commands you wish to erase.

2.Note that the Program/SPL Indicator 2 will flash amber, and the LED under the AVR Selector 5will turn red.

3.Within ten seconds, press the Surround Mode Selector/Channel Down button A.

4.The red LED under the AVR Selector will go out, and the Program/SPL Indicator 2will turn green and flash three times before it goes out.

5.When the Program/SPL Indicator 2goes out, the Macro has been erased.

PROGRAMMING THE REMOTE 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents AVR 3000 Audio/ Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesOutput Levels for Optimum PerformanceImportant Safety Information Safety InformationUnpacking Front Panel Controls Front Panel ControlsSee Front Panel Information Display Analog Input Indicator Preset Number/Sleep TimerFront Panel Information Display Front Panel Information Display Digital Audio Outputs Connect these Rear Panel ConnectionsRear Panel Connections Unswitched Outlet Remote Control Functions Remote Control Functions3000 Channel Direct Input MuteHas been pressed Remote Control FunctionsDirect Input Audio Equipment Connections Installation and ConnectionsVideo Equipment Connections Scart A/V Connections Volume on the TV must be reduced to minimumImportant Note for Adapter Cables Important Notes for S-Video connectionsRemote Control Extension System and Power ConnectionsExternal Audio Power Amplifier Connections AC Power ConnectionsSpeaker Placement System ConfigurationSystem Configuration Speaker SelectionSwitched AC outlet Settings to be Made With Each Input UsedUsing the On-Screen Display Selecting the On-Screen displaySurround Setup Input SetupSpeaker Setup Surround Delay Settings Adjustments for Other InputsNight Mode Settings Logic delay should be set at twenty millisec- ondsOutput Level Adjustment Press and hold the SPL Indicator Select Using EzSetProper Outputs Will change color to indicate the level On the remote only, not the main vol- ume controlsTo turn the test tone off and return to Master MenuOperation Controls and Use of HeadphonesBasic Operation Source SelectionSurround Mode Chart Digital Audio Playback Surround Mode SelectionDolby Digital PCM Audio PlaybackMP3 Audio Playback Digital Status IndicatorsSelecting a Digital Source Rear or front panel #$. In order to proRecord mode Night ModeTape Recording Audio OutputsMemory Backup Output Level Trim AdjustmentChannel Direct Input Recalling Preset Stations Preset TuningTuner Operation Station SelectionRDS Operation RDS TuningRDS Display Options Program Search PTYOperation Turn On Volume Level Advanced FeaturesAdjustment, use the ‹/› buttons E Enter this setting Advanced FeaturesFull-OSD Time Out Adjustment Semi-OSD SettingsProgramming the Remote with Codes Time. When the Program/SPL IndicatorDirect Code Entry Auto-Search MethodProgramming the Remote Erasing Macro CommandsMacro Programming Press the AVR SelectorOperate the Volume Control Volume Punch-ThroughProgrammed Device Functions Remote With Other DevicesChannel Control Punch-Through Resetting the Remote MemoryTon , followed by the VID 2/TV Input Selector buttonFunction List Function ListAVR DVD Setup Code Table TV Neckermann NECNokia NordmendeSetup Code Table VCR Kendo JensenKenwood KoertingCode Number 3digit List Setup Code Table CBLSetup Code Table CD Setup Code Table SAT Code Number 3 Digit List Setup Code Table DVDGoldstar LG RuncoProcessor Reset Troubleshooting GuideTroubleshooting Guide Technical Specifications Harman Consumer International
Top Page Image Contents