Chamberlain RDO800 manual Rope Manual Release Release handle

5Prepare Opener

Set Opener Position (Left or Right hand)

For left hand side installations

the wire jumper should be removed.

Attaching the Extension Poles (if required)

1.Insert the extension poles into the gear

2.Align the extension pole holes with the gear holes

3.Using the supplied screws secure the extension poles.

Place the Opener in Manual Release mode.

Disengage:

Pull the release cord down once until you hear a clicking sound. The operator is now in manual mode and may be opened or closed.

For right hand side installations the wire jumper should be in place (factory installed).

Engage:

To re-engage the opener, pull the release cord down until you hear a clicking sound, the motor is now ready for operation.

Note: The drive forks may now be positioned into the drum as required.

Rope

Manual Release

Warning Label

Release handle

3