Chamberlain RDO800 manual Prepare Opener, Attaching the Extension Poles if required

Page 4

5Prepare Opener

Set Opener Position (Left or Right hand)

For left hand side installations

the wire jumper should be removed.

For right hand side installations the wire jumper should be in place (factory installed).

Attaching the Extension Poles (if required)

1. Insert the extension poles into the gear

2. Align the extension pole holes with the gear holes

3. Using the supplied screws secure the extension poles.

Place the Opener in Manual Release mode.

Pull the release cord down and across to engage the ball into the cup.

The drive forks should now be able to be moved manually.

NOTE: To re-engage the opener, pull the release cord across and up.

Engaged		Disengaged
Operation Mode		Manual Release Mode

3

Image 4

Contents Page Carton Inventory Tools RequiredInstall stop bracket collar Install weight barDoor Requirements Prepare DoorPrepare Opener Place the Opener in Manual Release modeAttaching the Extension Poles if required Installation steps For Right Hand Installations Refer ,Attach the Release Handle and Cord Operating the Manual ReleasePinning the Door To disengage the openerDelete all Remote Control Codes Setting the LimitsProgram your Opener & Remote Testing the Safety Reverse System Setting the ForceInstall the Protector System Safety Beams Special Features AccessoriesTroubleshooting Green start button Opener Light Will Turn OnGarage Door Opener Warranty Page Carton Inventory Door Requirements Rope Manual Release Release handle Installation steps Rope Manual Release Release handle Program your Opener & Remote Setting the Force Care of Your Opener Troubleshooting Maintenance of Your Opener 114A3594 C , 2008 Chamberlain GmbH