Chamberlain RDO800 manual 114A3594 C , 2008 Chamberlain GmbH

Page 24

GARAGE DOOR OPENER WARRANTY

Chamberlain warrants to the first retail purchaser of this product that the product shall be free from any defect in materials and/or workmanship for a period of 24 full months (2 years) from the date of purchase. Upon receipt of the product, the first retail purchaser is under obligation to check the product for any visible defects.

Conditions: The warranty is strictly limited to the reparation or replacement of the parts of this product which are found to be defective and does not cover the costs or risks of transportation of the defective parts or product.

This warranty does not cover non-defect damage caused by unreasonable use (including use not in complete accordance with Chamberlain’s instructions for installation, operation and care; failure to provide necessary maintenance and adjustment; or any adaptations of or alterations to the products), labor charges for dismantling or reinstalling of a repaired or replaced unit or replacement batteries.

A product under warranty which is determined to be defective in materials and/or workmanship will be repaired or replaced (at Chamberlain's option) at no cost to the owner for the repair and/or replacement parts and/or product. Defective parts will be repaired or replaced with new or factory rebuilt parts at Chamberlain's option.

If, during the warranty period, the product appears as though it may be defective, contact your original place of purchase.

This warranty does not affect the purchaser’s statutory rights under applicable national legislation in force nor the purchaser’s rights against the retailer arising from their sales/purchase contract. In the absence of applicable national or EU legislation, this warranty will be the purchaser’s sole and exclusive remedy, and neither Chamberlain nor its affiliates or distributors shall be liable for any incidental or consequential damages for any express or implied warranty relating to this product.

No representative or person is authorized to assume for Chamberlain any other liability in connection with the sale of this product.

Declaration of Conformity

Automatic rolling door openers, as stated, are in conformity to the applicable sections of EN55014-1 (2000), EN55014-2 (1997), EN61000-3-2 (2000), EN61000-3-3 (1995), EN 301 489-3 (V1.3.1), EN 300 220-3 (V1.1.1), EN60335-1 (1994), and EN60335-2-95 (2000).

Per the provisions of the European Directives, 89/336/EEC, 2006/95/EC and 1999/5/EC, including all amendments;

Model:

RDO800

All technical file information for the operator and its accessories is held at The Chamberlain Group and will be made available at the request of the authorities should the need arise.

Declaration of Incorporation

A power door operator must not be put into service until it has been completely and safely assembled and installed, with appropriate size and weight of door, in accordance with both the door and operator manufacturers’ instructions using appropriate safety devices, and the complete installation has been declared in conformity with the provisions of EN12453, EN13241-1 and the Machinery Directive, 98/37/EC.

 

 

Door Type: Rolling Door

 

 

 

 

 

 

 

 

 

 

 

 

Operator

Maximum Area

Installer: Indicate

Maximum Weight

Installer: Indicate

 

 

Type

(m2)

Installed Door

(kg)

Installed Door

 

 

 

 

Size

 

Weight

 

 

 

 

 

 

 

 

 

 

RDO800

12.0

 

 

100

 

 

 

 

 

 

 

 

 

 

 

 

 

These declarations are made by:

 

 

 

 

 

 

 

 

 

 

 

________________________________________

 

B. P. Kelkhoff

 

 

Installer Name/Signature

 

 

 

 

 

________________________________________

 

Manager, Regulatory Affairs

 

 

 

 

 

Company Name

 

 

 

Chamberlain GmbH.

 

 

 

 

 

 

D-66793 Saarwellingen

 

________________________________________

 

June, 2007

 

 

 

 

 

 

Address

 

 

 

 

 

 

_____________________________________

 

 

 

 

 

Date

 

 

 

 

 

 

 

 

 

 

114A3594 C , 2008 Chamberlain GmbH

11

Image 24
Contents Page Carton Inventory Tools RequiredInstall stop bracket collar Install weight barDoor Requirements Prepare DoorPlace the Opener in Manual Release mode Prepare OpenerAttaching the Extension Poles if required Installation steps For Right Hand Installations Refer ,Attach the Release Handle and Cord Operating the Manual ReleasePinning the Door To disengage the openerSetting the Limits Delete all Remote Control CodesProgram your Opener & Remote Setting the Force Testing the Safety Reverse SystemInstall the Protector System Safety Beams Special Features AccessoriesTroubleshooting Green start button Opener Light Will Turn OnGarage Door Opener Warranty Page Carton Inventory Door Requirements Rope Manual Release Release handle Installation steps Rope Manual Release Release handle Program your Opener & Remote Setting the Force Care of Your Opener Troubleshooting Maintenance of Your Opener 114A3594 C , 2008 Chamberlain GmbH