Hitachi 308996J important safety instructions Fire and Explosion Hazard

Page 4

WARNING

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DGround the equipment and the object being sprayed. Refer to Grounding on page 5.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.

DKeep the spray area free of debris, including solvent, rags, and gasoline.

DElectrically disconnect all equipment in the spray area.

DExtinguish all open flames or pilot lights in the spray area.

DDo not smoke in the spray area.

DDo not turn on or off any light switch in the spray area while operating or if fumes are present.

DDo not operate a gasoline engine in the spray area.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

4 308996

Image 4
Contents Instructions Parts List Important Safety InstructionsPart No Pump, Series B, 101 Ratio, with Falcon Air Motor Part No Pump, Series B, 201 Ratio, with Falcon II Air MotorTable of Contents SymbolsSkin Injection Hazard Fire and Explosion Hazard Installation System AccessoriesMounting Accessories General Information Prepare the Operator GroundingAir Line Accessories Fluid Line AccessoriesTypical Installation Operation/Maintenance Pressure Relief ProcedureInstall the Spray Tip Starting and Adjusting PumpFlush Pump Before First Use Preventive Maintenance Schedule Shutdown and Care of the PumpFlushing Explosion Hazard onTroubleshooting Chart Problem Cause SolutionService Disconnecting Displacement PumpReconnecting the Displacement Pump Required ToolsModel 241594 Shown Disassembly Torque to 30-40 ft-lb 41-54 N.m Torque to 5-20 ft-lb 120-27 NSm *13 Lubricate Reassembly 9097A Parts Description QtyDisplacement Pump, Series B Part Description QtyRepair Kits Repair Kit 241597, for Falcon PumpThroat Seal Repair Kit 241827, for Falcon Pump Piston Repair Kit 241828, for Falcon PumpPiston Repair Kit 241830, for Falcon Pump Piston SST Conversion Kit 15B327, for Falcon PumpModel 241594 Falcon Pump Technical DataModel 241595 Falcon ll Pump Performance Charts Falcon llDimensions Mounting Hole LayoutGraco Information Graco Standard WarrantyToll Free