Wiring
To Motor
Power Supply |
|
From Circuit Breaker | Wiring |
| |
| To Motor |
Pressure Sensor |
|
Wiring |
|
Pressure Sensor
Wiring
Power Supply
From Circuit Breaker
CORRECTINCORRECT
4.For indoor or outdoor installations.
5.The SubDrive300 should only be mounted with the wiring end oriented downward. The controller should not be placed in direct sunlight or other locations subject to direct rain or snow.
6.The mounting location should have access to 230 VAC electrical supply and to the submersible motor wiring. To avoid possible interference with other appliances, please refer to the enclosed Installation Guide and observe all precautions regarding power cable routing.
7.To assure maximum weather protection, the unit must be mounted vertically with the cover properly aligned and secured with all eight lid screws.
12