Graco 1050P, 1050H, 1050A, 1050C, 1050S, 1050F Installation, Tighten Fasteners Before Setup

Page 7

Installation

WARNING

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or property damage.

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents.

Many other fluids may contain chemicals that can react with aluminum. Contact your material supplier for compatibility.

PLASTIC PARTS CLEANING SOLVENT HAZARD

Use only compatible water-based solvents to clean plastic structural or pressure-con- taining parts. Many solvents can degrade plastic parts and cause them to fail, which could cause serious injury or property damage. See Technical Data in this and all other equipment instruction manuals. Read fluid and solvent manufacturer’s warnings.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Route exhaust away from work area. If diaphragm ruptures, fluid may be exhausted with air.

Store hazardous fluid in approved containers, and dispose of it according to appli- cable guidelines.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns:

Do not touch hot fluid or equipment.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Clothing and respirator as recommended by the fluid and solvent manufacturer

Protective eyewear, gloves, and hearing protection

Installation

The Typical Installation shown in FIG. 4 is only a guide for selecting and installing system components. Contact your Graco distributor for assistance in planning a system to suit your needs.

Tighten Fasteners Before Setup

Before using the pump for the first time, check and retorque all external fasteners. Follow Torque Instructions, page 17.

312877P

7

Image 7
Contents 1050P Polypropylene 1050C Conductive Important Safety InstructionsRelated Manuals ContentsDistributor Note To Specify the Configuration of a New PumpTo Order Replacement Parts To Find Your Nearest Distributor1050A A01A Configuration Number MatrixII 2 GD c IIC T4 Atex CertificationsSpecial Conditions for Safe USE Tighten Fasteners Before Setup InstallationGrounding MountingFluid supply container Follow local code Installation of Remote Pilot Air Lines Reed SwitchAir Line To provide a remote exhaust Air Exhaust VentilationFluid Outlet Line Fluid Supply LineNK L Aluminum 1050A Fluid Inlet and Outlet PortsHastelloy 1050H or Stainless Steel 1050S Fluid pressure relief kit Aluminum pumps only, 1050A models Fluid Pressure Relief ValveFlush the Pump Before First Use Pressure Relief ProcedureStarting and Adjusting the Pump OperationMaintenance Torque sequence Torque InstructionsAluminum 1050A Dimensions and MountingCenter Flange 16.0 in mm Hastelloy 1050H and Stainless Steel 1050S Fluid Pressure Performance ChartsAir Consumption Technical Data Non-wetted external parts Fluid Temperature RangeGraco Information Graco Standard Husky Pump Warranty
Related manuals
Manual 32 pages 37.64 Kb

1050P, 1050S, 1050H, 1050C, 1050F specifications

The Graco 1050P is a paint sprayer designed to meet the needs of both professional contractors and DIY enthusiasts. It boasts a range of features and technologies that enhance its performance, efficiency, and ease of use, making it a reliable choice for various painting projects.

One of the standout features of the Graco 1050P is its powerful motor. With a maximum pressure of up to 2800 PSI, this unit is capable of handling thick materials, ensuring a smooth and even application. The robust motor allows users to spray a variety of coatings, including stains, sealers, and even heavy-duty paints, making it versatile for different jobs.

The Graco 1050P incorporates industry-leading Airless Technology, allowing for a high-quality finish without the need for thinning paint. This technology minimizes overspray and ensures that the paint is evenly distributed on the surface, reducing the time needed for touch-ups. The sprayer is equipped with a professional-grade spray gun that enhances control and accuracy, enabling users to achieve precise lines and coverage.

Another important characteristic of this sprayer is its lightweight and portable design. Weighing in at just under 50 pounds, the Graco 1050P is easy to maneuver, making it suitable for both large and small projects. The integrated handle and durable wheels add to its mobility, allowing users to transport it easily around job sites.

The Graco 1050P also features a convenient reversible tip design. This innovation allows users to quickly switch between different spray patterns and sizes, maximizing versatility based on project requirements. If a clog occurs, reversing the tip can clear it instantly, minimizing downtime and maintaining productivity.

For added convenience, the unit is equipped with a durable paint hose that extends up to 75 feet, providing ample reach for those hard-to-reach areas. Its filter system helps keep dirt and debris out of the paint, ensuring a clean application every time.

Safety is a priority with the Graco 1050P, which comes with an easy-to-use pressure relief valve. This feature prevents accidental discharge of paint and enhances user protection while operating the sprayer.

In summary, the Graco 1050P is a feature-packed paint sprayer built for both performance and convenience. Its powerful motor, airless technology, portability, and versatile design make it a top choice for any painting professional or DIYer looking to achieve flawless results.